开云体育

ways of s? Sent from AT&T Yahoo Mail on Android On Sat, Mar 22, 2025 at 12:06 PM, Roger Gustavsson via groups.io<roger.krokavadet@...> wrote: chu b Still, the as hoff-axis

Still, the off-axis response of large diameter capsules will show up in an ORTF setup. Den l?r 22 mars 2025 kl 17:15 skrev Jules Ryckebusch via groups.io <ryckebusch@...>:

When you flush-mount cardioid capsules, they are no more cardioid, they are more or less omni. But the tuning of cardioid and omni is different. The response may lack LF. You might like it, or not.

ORTF works great with LDC’s infinite all the time. Especially with pattern adjustable dual output mics. Best Regards, Jules Ryckebusch

ORTF is intended for small diaphragm capsules. With large diaphragm capsules the result may be a bit different. Den l?r 22 mars 2025 kl 15:23 skrev pmfalcman via groups.io

Depends how you choose to mount the boards. If there are no components on the other side and you mount them on the same surface as the capsules - say on the lid - it seems these wires should be long

A couple of final questions about this. First- my friend has the mics dismantled (photo attached), the mic capsule is connected to the pcb by two short wires (5cm) and I figure these might have to be

Hello everyone I found a curious model to build. https://aliexpress.ru/item/1005008213357702.html?spm=a2g2w.orderdetail.0.0.4a5a4aa6WoPxIa&sku_id=12000044258152672 I want to use the Primo EM288Z1 as

Thank you! Best Regards, Jules Ryckebusch

Ahh, excellent. ?Thank you! ?This should be a bit easier than I thought. ?I’m really excited to try this mic out, both for instruments and field recording. ?I really appreciate these kits

This works: https://www.amazon.com/Cubilux-Windscreen-Microphone-Compatible-Technica/dp/B0CMX2BCWY And any that will fit an AT2020 will work. Best Regards, Jules Ryckebusch

The mic body will let you fit any dead cat that fits a mic that size. I’m out now but will send a link to a few. Best Regards, Jules Ryckebusch

I think this question is mostly for Jules, but anyone else should feel free to chime in! I’ve purchased a Tabitha kit direct from JLI and am looking forward to building it! ?I want to use it for

Non-expert here, but in case it's useful: I made a "Simplest P48" mic to put inside my cajon, and that application may see louder SPL than what you're describing (depends on how close you are to that

That capsule had a max SPL of 110dB. If you go straight to a condenser without built in FET you can pad it with a capacitor. I’ve used the 2555B with a 220pF capacitor as a drum mic. It handles a

Hello Folks, I'm finally trying to get back to completing my SASS project using the? PUI 5024 capsules. The SASS with the 5024's is intended for use in quiet, natural ambient recordings. Since I

AN A5M ? DIGIKEY OR MOUSER

https://www.aliexpress.us/item/3256807646334959.html [email protected]> wrote: -- Best Regards, Jules Ryckebusch 214 399 0931 Linkedin <https://www.linkedin.com/in/jules-ryckebusch/>

I think they're looking for a Switchcraft A5M, which is a whole plug - but the insert is what you find. Or copies of that design. -Scott -- ---- Scott Helmke ---- scott@... ---- (734)

https://www.parts-express.com/Neutrik-NC5MD-L-1-5-Pin-XLR-DMX-Male-Panel-Mount-D-Series-092-2429?quantity=1