开云体育

half step x and y, full step z. Mike Hammel www.fancyfoam.com 1704 Bullard Arkansas City, KS 67005

Hi Mike: Are you running in half or full step mode on the steppers?? Art www.artofcnc.ca

They need to be turned on in the Config/state screen as well. Thanks, Art www.artofcnc.ca

Great to here from you Art. Before I expound on my problem, let me say that Mach 2 is a GREAAAAATTTTT program. I would not be in "production" if not for you and Mach 2. You have been tremendous help

Shouldn't be... Art www.artofcnc.ca

Hi Mike: There can be alot of reasons for losing steps. The fourth digit is not one of them . Mach2 keeps track no matter the number of digits. If you'd like to see 5 or 6 digits, then you need

Ron: Yes, at present those are the only ways. This may change soon as the "single function" screen capability is added.. Art www.artofcnc.ca

Do soft limits only work is limits switches are in place? I cannot seem to activate them in the demo version. I hit reference all button when maching is closest and in the right hand corner and can

I have a force feedback, will that make a difference? Robin

I think there is confusion on macros- Am I correct that are really two places macros can go 1) into files with name like M###.m1s These are run by putting an M### in your gcode program. 2) into the

Tom: I believe it would, but it would work anyway just by using the profiler. Art www.artofcnc.ca

I have a "missing step" problem. No, my porch isn't missing! I am running a router with 2000 steps per inch on x, 400 steps per inch on y. If I run simple patterns, I don't loose any steps. If I

Art, I have one of the wireless USB wingman game pads with two joysticks, lots-o-buttons and a speed slider. Do you know if anybody has taken the time to set one of these puppies up with MACH2 ?

I wonder if an RC/Transmitter would work, I have an extra...:) Robin

Hi Matt, Pretty much any joystick will work. If you want to use it with KeyGrabber then it has to be USB. KeyGrabber will allow you program the fire buttons to act as keys and will allow you to

Mike: As long as its name is *.m1s it will show up. Make sure you have your computer set to display the file extensions or you may be creating files called m44.m1s.txt or

Bob, Thanks, but I think what I was really asking is how many total sensors will or should I use for my setup? Including limit and home switches. Thanks again, Thomas

Robin how do you get the macro from notepad to the point of being able to call it up and use it?? Mike different edited in

That reminds me : [ BUG ] The inbuilt macro editor in Mach2 seems to recognise different carriage return/linefeed chars to Notepad. Macros created and edited in Notepad come out all on one line

I just got through reading my last download of the manual and did a search for macro/macros and did not find what I need. I am not a whiz when it comes to the pc so be patient please. How do you