开云体育

Hi: John I will do this soon. I have a few things to do to the lockdown to correct some quirks, then I will lock it down hard and puibish a new list. I will then prioritize the list and modify

Thanks Mark: I'll fix it up. You can get the motor tuning numbers from a macro and DRO them, applying formulas to get them to InchesPerSecond and such, but it would be a bit of work. Still on the

Gary: No, you can open your screen, select your buttons and select Copy in the edit menu, then open the real screens and select paste. (Or visa versa..) Art www.artofcnc.ca

Hi Matt: Amost any stick will do, but I use a wingman.. . Art www.artofcnc.ca

Hi Art, After all the posting and events that have occured since your last posting of "The LIST", maybe now would be a good time to again post "The LIST" and give everyone an idea of where you are

Art I mentioned this a while back but it must of slipped your mind. IJ Abs Led on Diagnostics screen is round the wrong way,It shows absolute when inc is set in logic tab and vice versa.Just thought

Art: When you say copy the buttons over do you mean just create a new button and add the text that I used? I see that as the only way to do it. Thanks Gary Art <fenerty@...>

Hi, I am interested to know if I can interface a regular windows joystick with mach 2. Is there a particular brand or something I should look for in buying one? Thanks, Matt

Gary: Youd either have top copy your buttons to the new screens or copy new features to your buttons. At the momewnt there is no other way.. Thanks, Art www.artofcnc.ca

<george_barr@y...> wrote: port)? George: You need to decide what conditions will cause an E-stop and what signals you have available when that condition occurs. Remember that any signal to the

Hi, I still have not figured out how to upgrade to another version and keep the buttons I create and also get the new features added to Mach2. I have tried using my old set file and also have

George: Yes, specify the EStop pin as whatever you wish... Art www.artofcnc.ca

Hi George: Yes, a second port can be used exactly like the first. It just doubles the in's and out's ... Art www.artofcnc.ca

Hi Olivier, Oops, sorry about that. I will change key 21 to something else. If a key works on one screen it should work on another. I cannot think of anything that would cause a key to stop working

How can I interface an ESTOP external switch to mach2. I have the PMDX.com parallel interface board and it does not seem to have an estop connection? Can I specify in mach2 which parallel port

I noticed that using only 1 parallel port does not have enough pins to handle all the limit/home switches for 3 axis and the solution is to combine some limit switches. However, I found out that

thomas, there is no advantages to use 2 limit switches i think. mach2 don't use the limit + or limit - information separatly. The only thing a limit do is Estop mach2, and eventually homing for

Using Campbell's breakout board what are the advantages and disadvantages to using one or two limit switches per axis? I will be using the Automation Direct proximity switches. Thanks, Thomas

I am not familiar with the Siemens board Henry is using, but it might be possible to adapt the Galil board to Mach2. There is a function on the DMC that allows an axis to follow input from an

Hi Robin, Yes. If it comes with a keyboard profiler then it can be used directly with Mach2. If not it can be used with my KeyGrabber profiler. Les INDECO wrote: