开云体育

Hi Art I did have a syntax error in the "SetTriggerMacro(991)" . I had "Set (space)TriggerMacro(991)" Now it runs without any errors. On step 5. where I lost you, I should have said: I went to

Tim there is a newer picture of the MPG pendant posted over at the Machsupport.com site. I do love my MPG pendant. Terry have projects,

Scot The name of that program is DeskEngave by Deskam.com John Columbus Ohio and what

thigns a

G28.1 Z5 says: Move the head rapidly to +5 inches then go find the Z reference (home) switch. Does this have the floating head and Z switch? The post should call for something like G28.1 Z.5 and the

Art, Good to hear that your PMDX-122 is finding a home. I also have an EMCO 5" training lathe that patiently awaits my attention. Cheers, Steve and glove into information

Hi Steve: I just put a PMDX-122 in the emco lathe Im retrofitting. Its nice and small to fit in those tight spaces. Works well, a fine board.. It fits like a glove into the housing of an

Hi, i used to have a program that you let you write text on an arc and export it as a dxf, it was free download from an engraving web site somewhere, i have seached but can not find it, does anyone

The PMDX-121 has been replaced by the PMDX-122. For more information see: http://www.pmdx.com/PMDX-122/index.html Depending on your comfort level with building power supplies, you may also be

I have a question about digital probes for a tag mill, I will be purchasing one in the coming week. if someone is using one I would appreciate some feedback on how accurate they are and do the

Hi Steve: SetTriggerMacro( 991 ) should work fine. Syntax error means it didne see it properly, misspellign perhaps? This has to pass properly, else the 301 will not have a number to trigger. Id

Hi Ron: Thats a cute one.. Hmm, the tab key is hard wired. They must have some sort of sticky keys turned on. Windows has a sticky key fnctionallity where if you hold down the ctrl key for so many

Ok thanks Art I will send you the file. Tim mode, enhanced generated file.. feedrate motion is with the have > >

Hey Everyone, I was just cruising thru the photos section & came across VMax's folders....... I must say, VMax..... Good looking installation on the control cabinet & I REALLY like the ModIO

I installed a system for my brother- being used by a bunch of high school kids. Somehow they can only get the Jog screen up by using <ctl>TAB. TAB alone will not do it. They have also managed to get

Hello Guys, The main reason for "hard" limit switches is to keep the machine from tearing itself apart whenever it reaches end of travel (either extended or retracted). They are not normally designed

I'm trying to use a 2nd parallel port's signals to handle my pendant needs using a PMG and push buttons. I have found VB Script routines and other helpful information here but now (after 2 days) I

Thorleif, Machines are different so pix are probably not all that useful. I'll ponder a bit more about this, may use a movable cam instead and leave this switch fixed like the rest of

Thanks Benny: I know about the screen designer but didnt want to change it unless this was going to work.. Its a big change internally. Ill try for the proper transparency for next version.. We'll

Hi keith, Is that advice? ....or a request...:) wrote: