开云体育

Hi Frank: As yet, no. The screens will change soon and be a little more like Mach1, or at least be able to be like MAch1, but at the moment, Mach1 screens are not

Hi: Mach2, like many programs does not allow a R arc which is a complete circle. Some program do allow this, some don't. There shoudl bea setting in you CAM program to turn on IJ mode arc's instead.

Hi Remo: Its not possible yet to launch a wizrd from a button. You can launch the wizard selector, but not the actual wizard itself yet.. Thanks, Art www.artofcnc.ca

Hi Bob I now understand what you mean by open collector. The specs for my MPG model says (Line Driver) They do have a voltage and a open collector model also. These are not available and are a

Hi Bob I now understand what you mean by open collector. The specs for my MPG model says (Line Driver) They do have a voltage and a open collector model also. These are not available and are a

HI Art there are only my problems/mistakes???? some old problems with 4(A)- axe A-toolpath with large files(>100000lines) impossible (PIV-2.8GHz 1GB memory) see A-velocity possible only in

Hello, I'm in process of building right now, and haven't used Mach2 much except for testing motors on the bench. However, I am familiar with setting tools etc. on cnc machines. There are two

Hi guys, I want to lauch the circular bolt hole wizard from a button, in a special application im constructing, can somebody please point me in the right directon regarding a macro for the button

Hello Is there a way to use the Mach1 screen layout with all the controls in Mach2. I like the layout and controls better in Mach1 it is alot cleaner and less clutterd. Thanks frank

Hi all, what kind of method is good to finding a edge of a meterial on na mill machine in XY axis ? I use a normal mill and very slow move to the material and when I hear a voice I type eg. -3 to

John: Ranting is cool as long as I have no bones to pick and I have righteousness on my side <G> I just wanted to make sure that everyone took the advice seriously (but I doubt if most will). I

Hi, Yes it is a sound logic board from bob Campbell. Not sure what you mean by open collector? Any help you can provide would be great, as well as where I can pick up the components I will need. I

Frank, If you are using the Campbell board the outputs A & B need to be open collector. If they are 5v logic out then the will not work. You will need to add transistors to the A & B output. I have

Hi, I cant seem to get my MPG to work. I have it connected to the encoder pins on the break out board. I am getting 5v to the MPG but nothing seams to work. Its a new mpg with a b and anot bnot. I am

I have made the Rectangular Pocket Wizard and it is ready for you all to tell me what I did wrong... I hope / think I have done everything that you all wanted in the past but... It is in the

I am trying to import .dxf files from my CAD program (QCAD) into Mach2, but am having absolutely no luck at all. The .dxf files are saved as AutoCad R12 files, and have been exploded. I know

I guess I should have said what the problems is, Mach2 is erroring out saying the current point and the arc end point is the same. Mike <abbottm@h...> wrote: just Mach2 it

Well I'm finally up to getting my CAD/CAM software working and just using the example code built in I generated the G-Code to test Mach2 with. I've run into a problem though with the G-Code It's

Ernie, Please do a right mouse click and then save. Bob Campbell Bob@... www.campbelldesigns.com Breakout board THC board sets CNC router plans Stepper Motors VisualMill Basic

What screen resolution is your computer using.... In Mach2 folder there are different screens to match your resolution. Or if you can, raise your computer screen(display) resolution to match the