Well I'm finally up to getting my CAD/CAM software working and just
using the example code built in I generated the G-Code to test Mach2
with.
I've run into a problem though with the G-Code It's generated and it
basically boils down to the following set of instructions:
G1 X15.346 Y0.471 F1
X15.448 Y0.571
Y0.368
X15.549 Y0.468
Y0.471
G3 X15.549 Y0.471 R-0.102
If I understand what it's trying to do is cut an arc that really
goes nowhere and is just decending into the part. I've tried
various decent strategies built into the software such as angular,
helical and linear and all of them help to a certain extent but
eventually the code eventually attempts to do basically the same
thing in the code snip above.
The CAD program is solidcam and the CAM is solidcam.
So the question is, what program is not working correctly.
