开云体育

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the mach1mach2cnc group. File : /New1024 screen.zip Uploaded by :

Any ideas on where I can buy a PCI parallel port card, inexpensively ($10 - 20)that is guaranteed to work with both Windows XP and Win2000. Most of the PCI cards are around $30 plus shipping when

Yes they do, S3 on the motherboard. It does have an AGP slot. Frank Carpenter

Did eMachines have built-in video cards? If so, that's your first problem. dg

Re-install XP, then download all the updates, install Mach2, if it doesn't work - send it back - it's one of the few incompatible systems.(along with dual processor machines ;) -- Steve

Well, I tried manual installs (new hardware device) with both drivers after stripping out the old and rebooting each time. First attempt with the stock driver I went straight to Mach2 and got

Hi Art left us with some holiday homework - i.e. to look at the information to put on each screen to make setting up and running a job on Mach2Mill flow smoothly. The manual describes the controls

I just received a refurbished E-machines Win-XP machine to run Mach2, It's a 1.6 Ghz Anthion and when I run the OCX Driver test I get nothing or hash. I've stripped out every process and

Just a test to see if emails are being sent - got none so far??

Hi all! I am new to the CNC world. I'm trained in electronics and find no end of ideas in this enviroment. Might have "stupid" questions sometimes, know a lot now but I look at it from a technical

This group is working well for me since it's been created. Thanks Paolo

RC7.2 is online. It only address the spindle speed problem , seems to work here fine, and a DXF problem. DXF was putting out 6 decimal places. Mach2 does not like more than 4. It can drop some kinds

What type of machining are you doing? if as your alias suggests you are mainly into woodwork you might ask the other members if their CAM systems cater for contour cutters to be fed into the edge

Hell Lee testing too :-) can you hear me from the fiery depths? I didnt know there were others down here too... ;-) wrote:

Hope everyone is able to see the message's now. Seems to be working. If anyone has other problems, just let me know. Alan

Hell Alan testing Jim

Alan, Messages are now present. Servo

I own Both Dolphin Partmaster and Visualmill. They are both very nice programs and I highly recommend them both. Dolphin Partmaster will probably do everything you would need and then some. Tru 3D

I would suggest you also consider TurboCADCAM. The 3D CAD is outstanding in ease of use and functionality. One of the best features is the wide range of file reads. It can read in from just about