I would suggest you also consider TurboCADCAM. The 3D CAD is outstanding in
ease of use and functionality. One of the best features is the wide range
of file reads. It can read in from just about any other source. The CAM is
only 2.5D but it works very well.
TurboCADCAM is the first system I have used that does CAM in a parametric
manner. If you make changes to your drawing, the CAM functions will respond
intelligently, rebuilding all the Gcode to match your changes in the
drawing.
G. Jackson
toggle quoted message
Show quoted text
-----Original Message-----
From: routerman10 [mailto:marc@...]
Sent: Friday, July 25, 2003 9:46 AM
To: mach1mach2cnc@...
Subject: [mach1mach2cnc] CAM Software
I am researching CAM programs like VisualCAM, BobCADCAM,
DolphinCAM, Rams3D. I would appreciate any feed back on these or any
other CAM program. Basic drawing, stable tool path creation and post
processing to Mach2 are my requirements.
Yahoo! Groups Sponsor
ADVERTISEMENT
To unsubscribe from this group, send an email to:
mach1mach2cnc-unsubscribe@...
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
