开云体育

John: Very impressive. No wonder you've been so quiet these last couple weeks. I have more playing to do, but this will really help get 800x600 and other screens ready for the release. Excellent

Tim: In theory, they are not mutually incompatible. But in practice, it depends highly on the hardware used. Picture a two axis interpolated circle, when the X axis hits its 90 boundry, it must

Hi John: Great job as usual!!!!! Tried out the scaling and seems to work great. Thanks for hard work. Bob Harvey

Hi John: YOu must trun on backlash on the state config. Unless its on you'll have no change. The backlash is adjusted in the background and the correction takes place when an axis reverses movment.

If any of you are interested, Tiger Direct has trackball mouse for $2.99. This one is nice if you don't have much room at the

Hi All: Before I start this I should say that my "Manual" is not the latest update--printer is too tired to print that out often. My MDF Router has Backlash (surprise). 006" on "X", 009" on "Y" and

<signworks@c...> wrote: Go to http://www.motionvillage.com/motioneering/index.html and get a copy of motioneering with which you can simulate your whole system. As for rack and pinion, if you

just built it and gantry weighs 135# takes from 10 oz to just over 16 oz. force to move it I have a choice of 180 oz steppers or 600 oz servos both drives would be reduced 3.5-1 and one revolution

Hi to all who have worked with ScreenDesigner ScreenDesigner is a wonderful tool for customising our systems but you may have had frustratuions when a new release means you have to do lots of

OK, given the following: Application: Rack & Pinion Gantry router, work area is 8' x 13' Motor Specs: 37.51 oz-in/A (Kt) 25.0 - 30.5 V/kRPM (Kv) Terminal resistance 0.75 - 1.02 Ohms @ 4A Max

Art, On your spindle speed control, when selecting PWM as the out put, what is the timing of the Min Width and the Max Width of the pulse? I am testing a PWM Intergrator circuit and need to set the

"Alan Trest" wrote: John Prentice wrote: Absolutely good point John: Thanks, Alan

Joe, Please drop me a note offline and I will give you some information and prices on VisualMill. Bob Campbell KE5JO Euless, Texas bob@...

This feature is used on the Bridgeport EZ Trak and on the Southwest Prototrak. Both machines were designed with prototype/short run jobs in mind. There are other controls which also do this, I

Steve: You can add the Jog mode selector to any screen and it will begin to jog. You can also program a hot-key on your pendent to change screens for you if you have enough buttons. I haven't

And what a bloody nuisance it is too!! I use a pendant for jogging, but end up using the mouse to swap screens - really annoying when the idea was to do away with the mouse in the first place!! If I

Hi: A two-key jog would not affect the Joystick as long as the profiler for the stick can send double key strokes when hit. BUT, I think it could only be added as an option. This would screw up too

<cncprojects0@h...> wrote: <snip> and snipping the earlier citations would have removed 70 lines from this message ;=) It's more than just space on the Group. If you get individual mails or view

Derek, The westamp's really are solid and already tuned for your machine. You will avoid a lot of hassles if you use option 2 and keep them. I've heard that the R991H's work pretty well. I've had