开云体育

I tried one before getting the ESS. It worked really badly got all sorts of noise and false steps. That was probably because of the DC servomotor on the spindle. It makes tons of noise and even using

I like little solid state computers like the ones Lenovo makes. You can get them for well under $300. They do not have big cooling fans if any fans at all so do not drag in wood dust etc. Quiet as if

Some configuration is in Mach4 and some in the ESS plugin. ESS has excellent documentation as well as a wizard for dummies like me. I was anticipating a lot of work switching to ESS but it was real

Same, here, had all sorts of problems with USB which went away with ESS. Now I am trying a Masso which is al in one so other than being careful to avoid ground loops and shielding the VFD to spindle

Stephen, I’m no expert but I purchased a Chinese CNC router about 5 years ago and had several problems. I rebuilt the thing with new motors, better proximity sensors on X,Y, and Z. I’m

Following on from Bertho's advice you may want to look at ethercat. This is something that works on an ethernet connection and speeds up things. Very useful for high speed interfaces and actions. I'm

The procedure you outlined in your last paragraph will work well. Also, as far as I know, the config gets loaded to the ES when you open Mach4, so no worries there either. Sent: Saturday,

You could consider using a UC100 adapter (parallel to USB) which is what I did when I changed my PC. I have had no issues with my old setup but don't be tempted with knock off versions at a low price

Looking to create a new profile on an existing machine with Mach4 and ESS already set up. My concern is whether doing so, following warp9 instructions, will affect the already existing settings in the

Stephen, If you have the option to use ethernet it is a much better choice. It is galvanically isolated. USB is sensitive to groundloops and electrical interference. When I got a new controller

I would like to replace the current pc (with a parallel printer port) to a faster. machine, probably a workstation (USB’ no parallel printer port). My 3D router is a simple configuration, X, Y, and

Clicking any other button with the touch screen does work every time, though. Sent: Monday, March 14, 2022 8:28 AM To: [email protected] Subject: Re: [MachCNC] Mach4 Coil Winder Screen As for

As for your touch screen thing.. that sounds more like a touch screen setting to register what a "click" event is. You may need to set how fast a click is registered. I know we have a few here that

Printed it off and I will drop it off to one of the guys to work on.. Shouldn't be much of an issue to get this. I would like to see this ready for the new release we are finishing

Hi Brian: I got another one for ya’. I copied and modified one of the Axis Zero buttons on the Coilwinder Screen. I changed it from having a Left Down Action of “Zero Y” to having a

Whats the max speed you would like to get to? and How much acceleration are you thinking you would like to have.? I am thinking you need at a minimum 10 in/sec^2 I would like to see more like

Here is my mass numbers for the robot; X=146#, Y=126#, Z =65#. I added some extra weight in there for motors and the welding gun. I plan to use a rack and pinion drive so the drive pinion gear can be

Keep in mind that that often there are fractional turns, usually in practice ? or ? turns to match the pinouts on the bobbin used. Also partial turns are used for inserting insulation between

I think I like turns better but we can make it a selection.. The other 2 points seem easy enough ______________________________ Brian Barker Engineering / Development ArtSoft | Newfangled

For my use, I modified the screenset so that I can enter the desired number of turns, but this is converted to degrees for the G-code. Sent: Sunday, March 6, 2022 2:37 PM To: