开云体育

I've got a spare dell optiplex , gx280 , 3Ghz , 4G memory? 512M video card. Win7 -32 pro. Parallel port.?Will Run Mach 4 or Mach 3 .?Let me know.? On Tue, Feb 18, 2020 at 1:59 PM, Dave

I’m using a cheap Dell desktop computer dedicated to my CNC. I have a UC100 USB CNC motion controller driving my G540. One word of cation; don’t let yourself get suckered into the cheap knockoffs

Since my older PC kicked the bucket, I thought I'd possibly upgrade to another PC-CNC setup that eliminates the parallel port.? Thought I'd ask and see what everyone else was using - likes and

thanks, never though of looking there. Best regards, Spencer Chase 67550 Bell Springs Rd. Garberville, CA 95542 Postal service only. Laytonville, CA 95454 UPS

I was able to get the editor to work on win 10. Who knows, the 3 hour update that was forced on me might have fixed the fact that I think it did not work when I last tried it. I think the problem was

Just spotted a toggle on the diagnostics screen for toolpath on/off. Turn it off for fast loading. Martin

I have modified the standard screen set by adding a small B axis DRO to the first 3 screens. It can be downloaded from

I’m pretty sure there is a six axis screen distributed with Mac3, try that it would save you trying to make a new screen. Cheers Calum

i got it working but still have one or two questions. instead of using a variable that would expire with the program if i close it to edit it crashes for some reason. so instead i switch to relative

I found the velocity only mode was not bad. But if I want to use it like a hand on the end of the lead screw then I found the positioning and the DRO screen update of position was not as nice as the

Hi Spencer, The ModIO will work with some USB to RS232 converters. It depends on the driver for the converter. The Modbus RTU specification requires a delay at the end of a command to the Modbus

Hi John, A couple of points. You can configure the ModIO to run at 115.2Kbaud, although 56Kbaud is plenty fast enough. Also how fast are you planning to turn the MPG. :) 56Kbaud is fast enough to

Kinda what I figured after looking at the data sheet for the LCD and also the Python code that's out there to support the various screen sizes. I'll just have to wait until the 20x4 screens

Hi John, The ModIO formats the display for a 20x4 LCD only. Cheers Peter Homann - (from my mobile) http://www.homanndesigns.com

Hi Spencer. The reason for the MODIO is really simple. I bought one about 10 years ago. Haven't used it yet. With displays running $4 and even with shipping two only costing about $12 it wasn't a

I looked at the manual; and it does not look like you can change the display configuration. This would be highly unlikely. I have programmed microcontrollers with similar dis[plays and it is a genuine

Sounds like you are heading to a solution. You can, if you want to, reset the value of the B axis to zero on the diagnostic screen just like a DRO. Another option to consider when coming up with a

So it doesn't like a 12V power supply when connected to the PC. Raise the input voltage to 15V and it stabilizes. Turn the encoder one click and the start up screen changes to one with all sorts of

Well crap! Really must learn how to read. I was so excited when my 2 LCD displays arrived on Thursday. Today I carefully soldered on the ribbon cable and crimped the 16 pin socket onto the other

no need to answer previous question about running indefinitely, i can just use a large number more than i would ever need and quit when done. Best regards, Spencer Chase 67550 Bell Springs