开云体育

??? ??? 10-4 ??? ??? animal

what are you talking about? i was joking. you very gracefully said never mind. i was kidding? i was just suggesting that we can overthink this shit and need to not be too serious about it. Best

??? ??? ??? ??? has anyone ever told you your a "dick" ? , just wonderin . you should go back & look at some of your post's & your reply's .. if your so much better then everyone else why

Yes turn off the mind and we would all be ok why do we insist on making the mind things work. Machines are the answer.

??? ??? ??? ??? never mind ??? ??? animal

I could change motor direction with a relay. It would have to swap both the motor power wires and also the encoder phase pins. This is what I did manually. So a relay, probably something like a four

??? ??? ya can't change motor sirection with a relay? just like ya can with a switch ? ??? ??? animal

turned out to be easy to change the default direction. just swapped both the power leads to the motor and the A and B from the encoder. Then changed to active low from active high in the Z axis

i don't think it is a problem with the encoder. there was a problem with the connector which i think was fixed with some contact cleaner. the encoder is a cui which is not optical so it does not have

??? ??? a relay ? `??? ??? animal

What kind of make of encoder? do you have on the Z axis?. The type matters because the G 320X has a feature that will fault if the encoder connection is lost. If its HED see the G320X PDF Page 2? "

I am having intermittent problems with my Z axis. I have checked wiring and connectors and might need to just rewire the whole mess but I thought of an improvement that might help partly mitigate

Sorry, but that has not been released. The wizards are a supported product and we cannot support them if everyone is able to change them. If you will tell me what you would like to change, and it

looking for the password to edit a New Fangled Solutions wizard Mach version 3.042.040

Look at the topic on creating text on an arc. It should cover some of your questions. Martin

I have F-engrave and Gcode-ripper from this site as well. There is a useful YouTube video as well. https://youtu.be/nYm2pVXMVSc One of the options in F-engrave is text on a circle, one of the

https://www.scorchworks.com/Fengrave/fengrave.html great and free also check out his other free engraving code. I have used it many times.

There are several softwares out there that do it. What CAM software are you using to create G-code? Do you have any CAD software? I use a Vectric product called V-carve; it has the capability to

The spindle on a lathe is normally the C axis. Additional spindles on a mill are usually designated as axis A (the tool spindle is the C axis on a mill). Have you got an idea of which software you

Kinda new to the cnc stuff want to create text on an arc but can't find how to do it. Can anyone help?