开云体育

Why not temporarily uninstall your virus? software, load mach 4, check operating properly, and reinstall virus software...? Tamra?

It looks like my virus checker (Sophos) ?is quarantining the “ MACH 4 core.DLL” ?file. I’ve tried disabling my virus checker, and it continues to quarantine the file when I reload it.anybody

Hard drive crashed. Reinstalled Mach4 and upon loading any of the basic profiles, I get this message. “Could not initialize the core instance 0! rc = -17“ anybody have any suggestions? Thank

?So you have that part down? Got lost in the noise; what is your original problem?

Should of mentioned, I am New Zealand agent for HEXAGON/EDGECAM. Have all the softwear required to drive this machine. Cheers

Autodesk has a plug in for Fusion 360 that adds a lot of 4 & 5-Axis milling capability....Autodesk Fusion 360 with PowerMill | Get Prices & Buy PowerMill 2024 | | | | Autodesk Fusion 360 with

Definitely 5-axis. Does it have a tool changer? (curiousity question) Did this machine come with test files?Are you able to execute them? Are the test files readable gcode or are they unreadable

Hi John, Yes thats a increasing likely hood. In some fairness the mechanical part of the mill appears to be competantly made. The electronics selection is also sensible, Servo's with encoder feed

The following photos have been uploaded to the % AXIS Steeel Mill ( /g/MachCNC/album?id=290170 ) photo album of the [email protected] group. * 61gWq9qYbIL._AC_SL1000_.jpg (

Photos loaded into site.

To be clear not all Chinese companies copy and not all are dishonest. And there are some very smart engineers there. But one has to watch out and one of the reasons we now have this awful

Product copying issues: I have at least three cases of my products that were copied: 50 years ago, I designed a police scanner radio that got popular. A US company copied it and “improved” the

BTW, I think you do have to realize that your CNC 3040 may not end up being as good a deal as you thought. The Chinese are famous for copying (bugs and all) existing products without the background

Please take a picture of the machine as well.? ?Email: timgs@... I cannot promise anything but I can at least take a look; maybe point you in the right direction.

Log into groups.io, upload them into the MachCNC Photos section, and post the link to the photos here. Lou

Purchased from Chinacnczone Store. Answered all the questions, pre sale, Initially answered my questions, replaced part damaged due to incorrect packing. Provided operator and code documentation. (

Oh ??, if it is servo controlled that is definitely different. Who was the vendor you purchased it from?

Can you send a picture of the controller? If it is jus a black box; maybe pop the cover and take a picture? Www.tmsmachines.com

It all depends on the objectives. If the quality of the motion control is a priority I would consider Mach4, UCCNC or LinuxCNC.? Upgrading to closed loop steppers may be a good thing. Arturo

Hi Graham, USB and Ethernec CNC controller PoKeys57CNC could be right solution for you: https://www.poscope.com/product/pokeys57cnc/ It can do up to 8 axis, has 2 relays outputs and much more. You