开云体育

? ? Hi Stan, I understand what you’re saying. I just ordered a THC module from Cnc4PC.com, model THC-2. It’s compatible with the artsoft Mach3 plasma post processor. Unfortunately I have no

Chuck, in my opinion your post processor is at the core of any work done by CNC. I used the MP1000– THC for my post processor initially and then edited it for the laser, scribe, plasma, and the oxy

Thank you for the detailed response Stan, Are you using the artsoft Mach3 plasma post processor? Chuck

Hello Chuck, I have been using mach3 for many years on my 9' x 23' plasma table and basically what you're trying to do requires that you use a plasma post processor with THC. That is where your THC is

I recently attached by plasma torch to my milling machine. I am using the basic Mill profile And post processing my fusion 360 plasma cutter paths with the MACH3 plasma post processor within fusion

Ok Thanks Brian I will try to make a short video and send ?you a link if that would be better for you, I always don’t explain things clear, I know what I’m trying to say but most of time its not

Gary, I am working with an OEM now but if you can show one of the techs here I will get on it once they can show it to me. I am sure I can figure it out :) contact me off the list at brianb?? at

Hi Brian I think i had asked about this issue before, but i will refresh on it... I have a major problem with the axis's being centered, seems to happen if i do a manual jog? then zero the axis's and

random uncalled for movements. for example two features are spaced wrong in the y axis and then it is ok otherwise or at start a huge random move in the x direction. not subtle, could not complete

Spencer, It could be a lot of things. You might want to try the latest ESS plugin, I know Andy has worked a lot with dev. versions, and ESS 278.1 is actually the latest. Check the Warp9 forum for info

And that is why it is not released, we really do a ton of testing before we put a version out. Now do you have any examples that we can use to find any issues you may have ? One of the test machines

I installed the beta version and had all sorts of random behavior, gave up and went back to the old version which at least works. i am using ESS. Has the beta been tested with ESS? Totally random

Hi SteveThank you, I did not realise that.Brian Sent from Sky Yahoo Mail on Android On Sun, 12 Dec 2021 at 22:16, Steve Stallings<steve@...> wrote: If it runs in Mach3 in demo mode, then it

If it runs in Mach3 in demo mode, then it makes sense to simply use Mach3. Your Mach2 license is valid for Mach3 also. _____ Sent: Sunday, December 12, 2021 5:11 PM To: [email protected] Subject: Re:

Hi TomI have selected Mach2Mill and various other ones but with no luck. If I run the code in a demo version of Mach3 it runs ok. I will have a go at editing the G code as you suggest.?Brian Sent

Hi SteveThis is a registered version of Mach2 and has been working well on the same computer for a number of years.?Brian Sent from Sky Yahoo Mail on Android On Sun, 12 Dec 2021 at 19:21, Steve

This could be a symptom of being in DEMO mode which will stop after a fixed number of lines of code. Look at the status in Help > About to see if your license is being recognized. _____ Sent: Sunday,

I know nothing about Mach2, but the Fusion 360 posts are infinitely editable, either with Visual Studio Code or even Notepad++, so if you can determine which line of gcode is causing the program to

Please can I ask for guidance with a newly aquired CNC mill, which is running on Mach2 and has done for many years. I am unable to generate G code using Fusion360 CAM, that Mach2 will work with, it

it still does not work in the release version, just the beta version. i was not aware of the availability of beta versions until i mentioned the problem several times. no one told me it was fixed but