开云体育

I will be happy to see this Art. Thank You, Tom triggers. 20-40 us you set 0,2,4,6,8, and problem data as should be timing code to a

James, Using the PWM controller that you can get from littlemachineshop.com for the Mini Mill (Harbor Freight, Grizzly) I have rewired it so that the Estop Button kills the PWM power

seems to be it some 700 mhz celleron. Just the usual windows stuff running in the background. I'll try turning some things off in the task manager and let you know if it helps. Derek

Derek: Very strange,.this is probably related to an external issue and seems to be affecting the GUI timing. I haven't heard of it before. I will give it some thought. What speed CPu is this?

Hi art my x y and z axis jog keys have a large delay when I load in Gcode.I push the key and it takes a moment for it to engage and when it does it moves quite a distance after I let up. this was

I still use an old Toshiba Satellite 4080XCDT PII 366Mhz with 192Mb ram on XP Pro for bench testing interfaces etc. It works fine at 25KHz with network disabled. Network polling kills the pulse train.

I am no expert on the subject, but have a little experience. My Toshiba Satellite 1905-S303 (P4 2.4 with dedicated video memory) workes perfectly with Mach2. I was trying to help a Denver local get

Looking at laptop computers to run Mach1Mach2. Any input would be very helpful. Which ones work and which ones have had problems running the program. I do remember laptops that do not have

If Tom is out there: Next version will have a development tool for laser displacement triggers. You can set a grid that will make the DigTrigger output trigger for 20-40 us each time the X or Y

and Clipped from earlier message 223: "I ran across this more by mistake than by design. I have modifed my Post to do the following: G70 F84 G90 M05 G4P1 G01Z0.500F40 G00X11.780Y3.789; move to

never use the THC is missed and then Told you!........TOM C

I just got my New Mach2 Breakout Board from Bob Campbell Designs. This is a great addition to both mach1 and mach2. Easy to integrate and works very well with the system. I am now waiting for the

Todd: That explains why I couldn't find it, I was not using THC. (I never use THC, as I have no Torch or anything...). I will activate the THC and probably find this problem fairly quickly. It must

settings, the "ref" snip- Hi Art, I think I found something, I ran a file 5 times with out the thc and things worked as expected. I ran the same file twice with the thc on and no amount of zeroing

Added a button.. Regen does centre the display, but does nothing about the distortion applied by tool offsets. Had to give up testing for tonight, it's past complaining neighbour time <G>. -- Steve

Todd: Just turn off the home switches, select Auto-Zero in the Logic settings, and when you want to "zero" your machine coordinates, just hit the "ref" button. It will zero on the spot because you

Well, the way I do it is load the program, move the table to where I want 0,0,0 to be and click on the "Ref All ctrl A" button to establish that at 0,0,0 Seems to work for me, there may be other ways

for that snip- Hi Art- thanks for the in depth info, I think my problem is I am using the wrong command for zeroing. What command lets me load a file, turn on my cnc table, jog to the

I don't know what a gauge is in this context, or how I would use one?

Daniel: If you selct "AutoOverRide" from the corrections page, pressing Reset will overRide the limit switches until you jog off them. I couldn't use hi and low as many people wire their limits to