开云体育

Hi Sven Are you controlling an ac motor via VFD or a DC motor from a controller ? search in the top search box for message #146142 ( /g/MachCNC/message/146142 ) read replies from

Hello my name is Ed and I have a small cnc router and it was working fine and then I broke some pins and ordered a new control box and every since then it doesn't work right. I live in Troy Mo. and

Hey all Does anyone here use a csmio-ip-s or similar controller under mach3 ? How do I configure the 0-10v pwm signal on analogue out ? Configuring a porentionmeter(analogue in) was no problem But I

Stopping after each g-code line is what mach-3 does when it is in single step mode.? Check your setup and config file to make sure this is not the case.

Code block, I mean each individual instruction. No its not mechanical, I have a hand controller and motion is smooth and and calibration is very good. I thought originally it was a PC issue, then

Hi Graham, not sure what you mean by each code block.? One thing you might check is to see if the machine is slipping steps due to binding or excessive friction.? Sam

My thoughts as well. Alt-N or the button on the tool path screen will toggle it. When it is on the yellow LED above the button will flash.

Haven’t got single block mode turned on?

I have re commissioned my 3 axis mill, All goes well, Except!!! The machine stops at each code block. Appears if smoothing, forward looking is not working. I have changed the CV Control settings, made

fraserneville@... updated the photo album Fraser CNC ( /g/MachCNC/album?id=299410 ) : Some views of my 3D printed machine. The controller is an Arduino using the V3

I've just added a folder with 5 pics. cheers N

fraserneville@... added the photo album Fraser CNC ( /g/MachCNC/album?id=299410 ) : general view of my #D printed machine.

ANy pic's of yer new setup ? thanks animal

Hi all. Firstly, thanks to all those whose advice helped me all those years ago setting up my first CNC machine. Two disasters impacted my early use- my laptop with a parallel port got stolen and

Hello everyone I'm struggling with my brain, but I've made progress. My relay works as I want, but I'm stuck on the lighting of the led linked to the relay. This led has the code OEMled=1011 and I

hello thanks for the macro example i will read this carefully and i will not fail to come back to you as my english is mediocre i will tie myself in knots ++ gilles

On Wed, Sep 18, 2024 at 04:14 AM, Stephen Muscato wrote: hello everyone in the meantime, I racked my brain :o) and I managed to make my relay work I just renamed the OEM code of a led on the "Ports

I have various macros and have attached a pdf of them that may help you sort it out. You will need to get the Input and output numbers from the mach3 manual.

I wrote a script many years ago and don't remember much. Have you tried "Ports & Pins" you can select outputs there. Could you describe in more detail what you are trying to do? I understand activate

hi i'm starting the brain script and i'm stuck on how to activate a relay when a led is on a helping hand please ++