We need to know how you have the wired normally open or normally closed.
The estop will need to be un-checked.
Jim
toggle quoted message
Show quoted text
----- Original Message -----
From: "INDECO" <indeco@...>
To: <mach1mach2cnc@...>
Sent: Sunday, February 29, 2004 4:38 PM
Subject: Re: [mach1mach2cnc] can not clear external E-Stop in mach2
still no help Bob???
Robin
----- Original Message -----
From: Robert Campbell
To: mach1mach2cnc@...
Sent: Sunday, February 29, 2004 5:19 PM
Subject: Re: [mach1mach2cnc] can not clear external E-Stop in mach2
Robin,
The limit switches are also active high or low. For now, just reverse
the
state for the one that is giving you a problem. Later when you have
limits
hooked up you can change the state.
Bob Campbell
Bob@...
www.campbelldesigns.com
Breakout board
THC board sets
CNC router plans
Stepper Motors
----- Original Message -----
From: "INDECO" <indeco@...>
To: <mach1mach2cnc@...>
Sent: Sunday, February 29, 2004 3:41 PM
Subject: Re: [mach1mach2cnc] can not clear external E-Stop in mach2
> I did that Bob..I am running the sound logic.
> When it first come up, it says limit switch triggered
>
> Robin
>
>
>
> ----- Original Message -----
> From: Robert Campbell
> To: mach1mach2cnc@...
> Sent: Sunday, February 29, 2004 4:34 PM
> Subject: Re: [mach1mach2cnc] can not clear external E-Stop in mach2
>
>
> Robin,
>
> Make sure that you are using the Sound Logic XML file. You can
download
a
> copy from my web page.
>
> Then when starting up Mach2, click on Mach2 not Mach2 Mill. Select
the
Sound
> Logic XML file.
>
> This should set all your pins correctly and set the EPO setting
properly
to
> active low.
>
> Bob Campbell
> Bob@...
> www.campbelldesigns.com
> Breakout board
> THC board sets
> CNC router plans
> Stepper Motors
> ----- Original Message -----
> From: "INDECO" <indeco@...>
> To: <mach1mach2cnc@...>
> Sent: Sunday, February 29, 2004 3:28 PM
> Subject: [mach1mach2cnc] can not clear external E-Stop in mach2
>
>
> > Hello,
> >
> > I am running campbell board and i have the J-21 jumper 1&2
shorted
but I
> still can not clear the E-Stop...what am I missing?
> >
> > Robin
> >
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
>
>
>
>
--------------------------------------------------------------------------
----
> Yahoo! Groups Links
>
> a.. To visit your group on the web, go to:
>
>
> b.. To unsubscribe from this group, send an email to:
> mach1mach2cnc-unsubscribe@...
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
--------------------------------------------------------------------------
----
Yahoo! Groups Links
a.. To visit your group on the web, go to:
b.. To unsubscribe from this group, send an email to:
mach1mach2cnc-unsubscribe@...
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
Yahoo! Groups Links
