开云体育

I'm new to M17. I've just set up DroidStar for Android, and it works fine on DMR. So now I need to see if it works on M17. A few questions: --Is there an echo or parrot for M17? --Is there a list of

It's not really a forum or anything like that, it's more of a landing page for a possible ARC in the future. This SIG/UG is a better platform for those wishing to keep in touch with the Project and

I'll join. :) -- 73 de Tony VK3JED/VK3IRL http://vkradio.com

There was a talk about using Codec2 on D-STAR several years ago at the TAPR DCC conference.? I have seen the Powerpoint slides for that talk.? However, any further discussion seems to have stopped

The RB board will work fine on M17, if you are running up to date firmware.? I have one here that I use for M17Client, which has been tested in my repeater setup.? Looks like the Bridgecom repeater

VK3RCQ is operational, around 10km east of Bendigo, Australia. I run VK3RIR.? Currently on a dummy load until I get the antenna and paperwork sorted, then it will go live.? Both are multimode

First I've heard of this.? I'll take a look, though if it's a web forum, I'll find this list a better medium to work with. -- 73 de Tony VK3JED/VK3IRL http://vkradio.com

Haha well, if that happened, I would be interested in one.? Will have to try and get more locals interested as well. -- 73 de Tony VK3JED/VK3IRL http://vkradio.com

Appendix H in the spec defines KISS parameters and use in M17, which would give anyone interested in developing a TNC or program for M17 data a huge start. --- Steve KC1AWV M17 Project

The domain is held by the team, and was the beginning of efforts towards having an actual ARC aimed towards the proliferation of M17 and open source technologies for amateur radio. if there’s an

If the MMDVM firmware is version 1.6.0 or greater, I can guarantee it will work on a Bridgecom repeater. I have one at the lab that works flawlessly. --- Steve KC1AWV M17 Project

*Emily Litella voice* "All this talk about M17s. In my day M16s were good enough!" "Hmm?" "Oh. I see. Never mind." Less seriously, I remember reading that there was a flag in the D-STAR data

Hi Steve, Bridgecom sells an MMDVM upgrade for their repeaters that looks to be based on the same Repeaterbuilder MMDVM board I have been experimenting with. I can't confirm M17 runs on it, *yet* but

I support your idea, Steve. Voice repeaters are silent.... Data is the way to go. Adopting would be much easier if direwolf software could be used as a TNC for M17 Packet mode. I already opened an

I think that upgrading (or creating from scratch) a wide-area repeater to do “just another digital voice mode” (especially one that has only a few radio options available) will be a challenging

A primary reason that I consider M17 now viable is that it’s possible to build a repeater for use by M17. I first realized that from this mention of building an MMDVM repeater, which was capable of

I just discovered this… https://m17.club/ The premier M17 Amateur Radio Club Where the M17 Project is largely centered around development of the protocol and implementations of it, the M17

Hi. I’m Chip, W0CHP. I’m a M17 Project developer/sysadmin and board member, and I’m also the founder/principal author-developer/BDFL of the WPSD Project ( https://wpsd.radio ). Ben, KU0HN, is

Hello, This is Ben KU0HN. As far as M17 hardware I have: 1 MMDVM RPi hat hotspot running WPSD 2 MMDVM Pi hat modems.? These are both a work-in-progress.? One will be connected to a Kenwood

Austria is fine as well…