开云体育

Amen, Chip. Sent from my Boost Mobile Phone.

Hi Brian Tucker, NEAF, I wish I could get to that show someday! Skip the GPS, no need use your phone and a free app to get correct GPS coordinates or a laptop to Google maps your coordinates and then

Yeah, well, if I had upgraded. Bigger dome. +12 gallons & it's a Rubbermade! Oooo, Ahhhh! But instead, the CFO sez to bring it in at night. Makes me brey? like a donkey.... (

Got your note, Brian. Thanks for the quick response. Going to town today and will hit Fastenal. greg

Hi Brian, Just to confirm as Brian Valente mentioned: Loaded G11, balanced load, the motors will together total draw up to about 1.5 Amps during "Park" when both motors slew as fast as they are

Hi Brian ... I’ve got the G-11 with Gemini2. I use three of Pyramid PS-14K power supplies I got off Amazon. The Pyramids have 13.8V At 12 amps. I use one just for the G-11, but that’s an overkill.

Sorry Brian, one more thing, I never have found the need for GPS, I can get my location off my phone ( it is a simple update ) and if you can't get the GPS location on your phone the GPS unite wont

Brian, when I was in the investigation part. Realized all the threads on Cloudynights are really old, the new G11 with all the updates is really really well done. I had a great conversation with Issac

Greg, Did you report the runaway to local authorities? JK! -- Chip Louie - Chief Daydreamer Imagination Hardware

Brian Tucker, My G11G with Gemini 2-mini and HT servos when tracking at sidereal rate draws well under 0.5A, typically about 0.25-0.3 @18V from my bench supply. When slewing at the standard G11 rate

Thanks for the tip!? I'm trying to learn as much as I can about this mount before NEAF - I spoke to Tanya (I think) at Losmandy today, and am planning my purchase at NEAF.? One of the items I'm

Welcome WD4DX,The G11 works better with higher voltage, between 12 volts DC and 19 volts DC. My remote setup is a deep cell Marine battery with one of Michael Herman's voltage boosters

Thanks to all for your suggestions... I did fashion a makeshift cover to protect the mount itself and the Gemini computer from the sun. Re - running in the cold. I can say I have imaged pretty close

Hi Brian this is a good place to ask I think your understanding is pretty good. with good balancing your tracking should be around 500ma slewing can be up to 1.5a The mount will work with power

I'm investigating getting a G-11G, and have a question - I've viewed quite a few of the youtube videos from the Losmandy Channel, as well as several independent reviews, which are all pretty stellar.

Hi Greg I responded to your tech support question as well those are 4/40 x 1/4" buttonhead, stainless steel Brian -- Brian Brian Valente portfolio brianvalentephotography.com

Tim, Have used my Gll at cooler temps. (0 to -5 F) with no issues. Below that cables become brittle and rigid. I do get a frost build up on the inside of the roll off roof when it is -10 to -20 F .

Hi Greg! I took one of mine out and it appears to me to be a 4/40 TPI and is 1/4" long. Also it takes a 1/16" Allan wrench. All American dimensions, as you would expect. I think if you email

You’re portable dome is titled “Rubbermaid Commercial Products BRUTE 44-Gallon Gray Plastic Trash Can with Lid:???? And that’s the *upgraded* version?? lol Thanks Brian portfolio

I used to leave my mount out 24/7/365. But my brand new GM811G HD is just to darn pretty for that. But, for those who would like to, I suggest a $15 portable dome. I always covered my mount (POS that