开云体育

Very nice complete report, Russ. I am happy that repair ordeal is over. Use it in good health and have fun! More of the puzzle story....a long story: As Russ said, this was a weird Gemini-1

Hi Tony, Compatibility with the Gemini 2 is pretty easy. Years ago, Meade developed the LX200 command set and made that available as a standard to anyone who wanted to use it. Not everyone took them

Ditto.

Hi Russ Ethernet is RJ-45. the various serial ports are RJ-11 You can find silicone or plastic port plugs for either

You still need pretty good tracking to keep something on a small sensor for a couple of minutes. Typically focal lengths are above 5m and the ROI is a few arc minutes across. You can actually

I unfortunately had up scrap a G1 recently. ?Corrosion around main pwr switch fuse, and electro/and pwr DIN sockets. Water had entered and pooled inside the case lower corrosion set in land lifted

Thanks Brian for your useful comments. So am I correct in identifying the network type connector sockets as RJ-11 rather than RJ-45? If so I can get the correct Teflon plug. This can be inserted with

Hi! I use Ekos/Indi to control everything and capture. and I am more than happy with it. Fully automatic. You find it at indilib.org Best, Magnus Den 2020-10-07 kl. 22:51, skrev Tony Gabriele

Hey Tony, SGP has been serving me for about 3 years now and I have found it to be the most useful of those few apps I have tried. The plate-solving feature is super nice, where you can pretty much go

Hi Russ wow that's quite an odyssey. Hats off to Michael for the great repair, it sounds like regarding protecting the sockets, and more generally protecting the electronics you can buy soft

How pleased I continue to be with my 2008 version of Losmandy G-11. After 12 years the?Gemini-1?electronics had quite working. On the recommendation several persons on different forums I entrusted

I use kstars / ekos / Indi / phd2 on a raspberry pi. It does sequencing plate solving guiding capturing. Just about everything. PEC programing requires pempro to run on windows. Oh and skyfari pro for

As long as everything is ASCOM compliant you should be OK.? I use the current released of... * N.I.N.A. * TheSkyX Pro * PHD2 Guide * PoleMaster

but it's not clear if you get a new camera if you have to upgrade to get the drivers! SGP uses ASCOM so I don't think support for future cameras is in jeopardy (at least ASCOM support: native support

Brian I got the email but was surprised at the renewal fee of $149. I just put it out there so if viewers, if they weren't aware, they are now. I'm not sure I need an upgrade yet but it's not clear if

Chuck you should check with them they will waive the $149 for existing license holders You can use 3.1 indefinitely. 3.2 is the subscription version the links etc. were sent out in an email. if you

Brian My license shows 3 available, subscription ended, $149 & $59/year to continue. My version 3.2 works but updates don't work!!! Looks like they've joined the dark side of the force (AKA

Yes i did. i read through that pretty thoroughly because i have 6 licenses for SGP (they sell it in 3 packs and i needed 4 so that's where i ended up) I decided to give it a year and see what

BrianDid you get the same notice from SGP that they've gone to yearly fee service? Chuck

Hi again Tony Pretty much all software works great with Losmandy Gemini, thanks to its excellent ASCOM software program Gemini Telescope.net For capture software i've personally used many solutions,