开云体育

Very nice... Is that color midnight blue? You Gemini should last forever!

Since my recent problems resulted from efforts to deal with moisture on the G11/Gemini-1 mount, I have decided to institute some changes in how it is used. No longer will I leave the electronics

I've sort of answered my own question. Based on physical dimensions the Hand Controller and Autoguider jacks are the same size (with 6 pins, RJ-11). The Encoder and Feature jacks are a different size

Steve... if its a real old ST4 camera.....like the early sbig??? Most used +12V out as the signal top move the mount.? The modern ST4 system has completely changed and now uses a "gnd" or "low" as

Hi Brian, Before ordering silcone plugs for the ports I want to make sure I have it right. According to the Losmandy G-11/Gemini-1 manual the RS-232 fort is RJ-22. That one will be occupied by the

Hi Michael, Thanks for a little more of the process you followed to find the problem. That is why consulting experts like yourself is well worth the effort. I will also be getting some of those

Thanks for your suggestions. I may look for a relatively inexpensive used autoguiding camera that has an ST-4 port, or perhaps a GPUSB converter, but in the meantime, I will try using an ancient

Also best not to cross post the same question ( /g/Gemini_users/topic/492_dds/77412840?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,77412840 ) between forums. ?Most people

Hi, all.? I recently acquired a used Losmandy GM-8.? It's a solid unit and It has the stepper motors on it but no control system. So I'm looking for a 492 DDS, hand remote, wiring to the steppers,

you have to enable it to access telescopes. It works fine on PC, i don't know much about the Mac version. wrote: -- Brian Brian Valente portfolio brianvalentephotography.com

Did you check "load at startup" and restart stellarium? telescope plugin needs to load before you can configure it wrote: -- Brian Brian Valente portfolio brianvalentephotography.com

Thanks but if i do that the while program freezes.

You have to check the box "Load at startup" and restart the application. Then the configure option should be enabled. At least that's how it worked for me Guilherme wrote:

Hi One simple option to allow PHD2 to guide with the 492 controller (besides using a camera with an auto guider port as mentioned above) is to use a GPUSB adapter. This device connects to your

Steve the 492 digital drive unit ?has no computer connections. ?However you can connect an modern ST4 autoguider and auto guide with the unit. What you do is remove the HC and plug in a 6p6c (6

Nice Deric - that's the way to do it wrote: -- Brian Brian Valente portfolio brianvalentephotography.com <http://brianvalentephotography.com>

I abhor recurring charge crap. The only one I've signed on for is *Sharpcap ( https://www.sharpcap.co.uk/ )* , but I did that before I even got it working for me, based on reputation. Then I found a

This is my first post to this group. I have appreciated the insights from past messages as I have disassembled, cleaned, and lubricated a new-to-me, twenty-year old, GM8. I would like help connecting

Way to go Michael, Those little plugs came up about two years ago and I thought " Hey thats a good ideah. HAPPY SKIES TO EVERYONE AND KEEP LOOKING UP DERIC

I love a happy ending! Kudo's to Michael for the save! I got 2 of these *silicon port plugs (