开云体育

Aristo, If you need to see the screen shots for the TP Link nano routers Brian has screen shots with the correct settings. I did a commented setup and walk-through for both TP Link nano routers and

Hi David, Serge told me the magnetic rings are the same. The difference is on the pickup side of the encoders which are programed to count differently which yields you a 10K tic encoder system. I

Like Tim I'm now using Sharpcap to Polar Align. Here is a video that helped me get it down pat: https://youtu.be/ivlgbgNIeTU Unlike Tim, once I have Polar Aligned with Sharpcap, the Polar Alignment is

Hi Warren, I forgot to ask if you have discovered BYEOS yet? I don't have an M50 but the latest release now supports most of the better Canon MLIC bodies including the M50. Check it out:

Hi Warren, I left out information on #1, the ST4 autoguider interface has been standardized for many many years and the Gemini 2-mini is fully compatible with that interface. The term TTL stands for

Thanks a lot Brian for help I’ll do that.

You first need to download and install the ASCOM Platform here: https://ascom-standards.org/ on the right side you will see a big download button with the latest build (6.5 right now) You can

Thank you Brian Now wondering how to download Gemini 2 interface to my computer.

HI Jeff If I recall correctly you have a C14 and a DSLR, and I think you are moving out the scope each nigth? You definitely have your work cut out for you - it's a demanding pixel scale. If you

PS: I usually also check the orientation of my cameras using Sharpcap's reticle and alternating between E and W movements using the Center speed. I rotate the cameras (if needed) until the star stays

Hi Jeff, Are you using the Gemini-2 Hand Controller by itself? You mentioned autoguiding, so can we presume you have a camera(s) and software ? The best choice options kinda depend on your available

I very much appreciate your comments, Chip. Warren

Thanks for all of your comments, Sonny. My main interest is visual, but I am being drawn toward the Event Horizon of imaging.? After I receive the new mount, I will be on the hunt for a SW180.? In

Hi aristo There are a lot of connections in there. you might try watching this video i did of using a microRouter (you can skip the Gli.net router-specific info, but the rest of it

Bittor What do ?you mean “collapsed”? ?Do you mean the display went blank? if so can you please tell me what version Gemini PCB do you have? See here ( https://gemini-2.com/pcb-pictures.html

I have connected ?wireless Router (TP-LINK) to the Gemini 2 using Ethernet connection (RJ45) Trying unsuccessfully to connect stellarium or SkySafari control to the telescope. I miss something in

I have had a G11 and a Titan on a mount in my observatory and I have always had to do a sync to a star in the east and the west to get it to land on the cross hairs of the chip. Most of the time, if

I have been getting my new g11t mount out as often as possible and have had some success using it, but it isn’t consistent. The thing I am not sure about is the sequence of polar alignment and

My experience has proven otherwise, Brett. So I run through my routine every time I begin an evening. To me accuracy counts. -- SonnyE Sonny's Youtube Channel (

Hi Stosh, Welcome to the Losmandy Group site. I decided to ask if I could pick up my mount at the factory, because I live a mere 20 miles away. I called and talked with Tanya, and she got back to me