开云体育

I got back to the group today. Thanks for the input.? Yes, the current settings work fine, just that there is a 10-15 second delay before the two start communicating. I did find in the radio's menu

For my Kenwood TS-870 and Windows 10 peecee I use a UGREEN 6ft USB to Serial Adapter, RS232Serial to USB Adapter DB9 Male 9 Pin with PL2303 Chipset from Amazon, works great, talks to Ham Radio Deluxe

Hi Karl, I use the RT Systems TM-V71 software and programming cable with my Windows PC - works fine with no issues and no need to set the baud rate. All I had to do was select the correct serial COM

I've never had to set that on any radio I've programmed in the last 30+ years. Any brand, any vintage.

Rusty, that's for the packet port and opertion. I was asking about the "PC" port for programming.? After reviewing the manual it looks like the RT software left out that feature. I'll have to

Page 83 in the Instruction Manual.

I couldn't find the baud rate either, so I'd be inclined to try the standard 9600 8N1.

RT Systems, in many cases, doesn't include all of the features found in the factory software. That's my experience. Gary

Anyone know where to adjust this ?? I did not find it in the user or service manual or on line.? I friend indicated it's done in two areas; the radio and the RT systems software. Would this be a

Thanks Jeff.. I did not follow those instructions specifically. I did do a master reset.. a couple of times. Also pulled my hair out chasing the individual gremlins. And, even if my efforts had found

Wayne, I cannot help you with a tech center, but wondered if you have been through all of the steps in section 15 of the Instruction Manual "Trouble Shooting" In particular there is an interesting

Howdy folks.? I have a Kenwood TS-590sg that is in serious need of some servicing.? To that end I am in search of a service center that can get'er done. The Kenwood site lists one in New York -

I'm glad someone is still active. I have the F6 and I haven't heard anyone on the repeater in years. All on digital I suppose. Richard, KE5JKJ wrote:

Glad some are still here. 73, Bob W4JFA [email protected]> wrote:

Note that the “ Kenwood TH-F6 TH-F7 Group” is active. ?There are recent posts. 73 Dean

Tad,? Not answering your inquiry but the only difference i found was the PTT button vers the PTT lever (like the old Motorola mics).? Mine had the former (which was hard to use) and found the level

Greetings all- Well, this is esoteric... I recently got a TM-541A 1.2 ghz mobile rig. Unlike ALL the other versions of this radio, there is no way to calibrate the frequency. There is no master TCXO

Thanks Mike, I’ll have a google and see if there’s anything local, 73 John M0CDL.

Hi John You could try taking it to an automotive paint supplier. They have a gadget to analyse car paint colours and should be able to mix some up for you. Incidentally the Argon One case for my

Hi all, Ive managed to get a TL 922 amp, lovely condition inside, but the outside case is a little on the tatty side lots of scratches and scrapes, I would like to repaint it does anyone know what the