开云体育

How do I refresh the catalog? recieved the following from a wx report inquiry... Inquiry Alert Re: FPUS62.KRAH Date: 2025-01-23T14:33:00-05:00 From: SERVICE To: K4GMV Unable to complete Inquiry: [FPUS62.KRAH] at 2025/01/23 19:33 The probable reason was: Unknown Inquiry ID -- [FPUS62.KRAH]. Please refresh the catalog if it hasn't been accomplished recently. This will remove old, discontinued, and broken entries and add any new ones. ------------- How would I refresh the catalog? On both rpi and x86 installations? Thank you for your recommendation(s) 73 Karl K4GMV

Hi. I searched the archive and did not find an answer. Probably in there somewhere. I need help. Have worked through all the setups and have ability to Tx on vara hf with my FT897 using FLRIG. Have been using FLRIG for years with fldigi and JS8Call. I have an email in the outbox, so I know I have traffic to send. I'm selecting "VARA HF" in the drop down modem box in the "connect to remote node" window. I've used winlink on Windows PCs so I have some idea of what to expect. If the far end station responds to my connect request with a short burst, my station will respond with a longer burst (longer than a retry of the initial connect request), but when my station finishes with the long burst I can hear the far end finishing a data burst followed by a CW ID. My station will keep retrying to establish contact since it did not hear whatever data burst the far end was sending prior to it's CW ID, and then my end will time out and do it's own CW burst. Again, I have a message in the outbox, so I should be asking the far end to accept it. If I'm even getting that far with the connect dialog. I am registered with winlink and vara, that's not the problem. I haven't done any unique setup config changes other than to get FLRIG and RIGCTL working. I have ALC set correctly. I'm using 50W with the FT897. My computer is an X86 running Ubuntu 20.04...it's been updated via the terminal. CONKY shows PAT/FLRIG/RIGCTL all active. Any help would be appreciated. I apologise if this is a repeat request but I could not find any help in the archives that helped my fix this. 73 Jim W0JPO

My plan was to hang a 32” Vizio TV in my shack and run HamClock and other programs. The Raspberry Pi output to a 42” worked just fine, but when I set it up with the Vizio 32” the image I guess was too big and ended up being crooked on the screen and the top menu was nearly completely obscured. I be,I’ve there should be a solution to this but as a Linux newbie I don’t know how to fix it. Rick, W2JAZ

Greetings, I have been attempting to get winlink and vara hf to run on my pi 4 with the lastest x64 RPI os. Rig control works fine (Flrig), I can tune in Vara, I can use WSJTX just fine. When I try to connect to a winlink HF vara everything goes fine, except at the end it just says connecting and no rig control happens, then it does nothing. So I gave up on winlink in wine and am now tying Pat with KM4ACK's Pat menus. Once again everything is working fine, my sound card is set, Flrig is working, and I have CAT control enabled in the config. Once the html launches the browser, I receive the error below. I'm using a digirig with a Xiegu G90. Any help would be much appreciated! Thanks, Bobby W6IWN Subject From Date Message ID 2025/01/12 07:56:37 Unable to get frequency from rig my-rig: dial tcp 127.0.0.1:4532: connect: connection refused. 2025/01/12 07:56:37 Starting HTTP service (http://127.0.0.1:8080)...

Having an issue with pat and rigctld says connection refused and I am LOST. rigctl turns green in only then goes out , on my phone atm will try to login on the pi and website Thanks N5ATK

OK, next issue … First off, I reviewed Jason’s YT video on the TNC3 and the updated PAT Menu - about 2 years old - and the older (pre-PAT Menu) video using a TNC2 - about 5 years old. Going to PAT Menu -> start/stop modem -> Start Mobilinkd Modem BT. Get connection successful. Clicking Start Mobilinkd Modem BT again (as required) does NOT give a connect and HTTP. It restarts the first dialog - endless loop.. I tried to do the older method with copying the MAC address with hcitool scan and then running rfcomm connect an I got a permission denied for connect. I tried going wired to the TNC3 and it worked flawlessly. Any help appreciated. Going to stop here for the day - not tackling VARA until later ! 73, Jamie WB4YDL

Hello! Installed 73Linux on fresh baked pi 4B running "bookworm." Some minor issues: Grid square not displayed on pat menu even though correctly entered in config file. This causes an error-msg /warning I want to download winlink locations. Says distance and azimuth cannot be calculated. The pat app does however start without any error-msges. pi-ARRS cannot start modem(s). I see in the terminal window that there is a problem with X11 window. ignore the error-msg about direwolf.config. I till must edit it: (yad:24359): Gdk-CRITICAL **: 19:34:36.053: gdk_x11_window_get_xid: assertion 'GDK_IS_X11_WINDOW (window)' failed Dire Wolf version 1.7 Includes optional support for: gpsd hamlib cm108-ptt dns-sd ERROR - Could not open config file /home/pi/direwolf.conf Try using -c command line option for alternate location. See online documentation: stable release: https://github.com/wb2osz/direwolf/tree/master/doc development version: https://github.com/wb2osz/direwolf/tree/dev/doc additional topics: https://github.com/wb2osz/direwolf-doc (yad:24397): Gdk-CRITICAL **: 19:34:44.368: gdk_x11_window_get_xid: assertion 'GDK_IS_X11_WINDOW (window)' failed Unable to connect to TCP KISS TNC at 127.0.0.1 (127.0.0.1), port 8001 (yad:24435): Gdk-CRITICAL **: 19:34:46.651: gdk_x11_window_get_xid: assertion 'GDK_IS_X11_WINDOW (window)' failed CONKY installs but gives me only a black screen that covers up the app bar at the top of screen. During the installation I noticed a similar error-msg concerning the GDK IS 11 window failing. Could these problems be related? WSJTX I noticed the installed version will expire on 15 JAN 2025. Can I update over the 73Linux app? Not a 73Linux issue, but: Every version of RPi OS has its annoying problems, it seems.For me it"s the VNC server. RPiOS "bookworm" uses WAYVNC server. Never heard of it. Most of my VNC clients haven't heard of it either, because they cannot connect to the VNC server on my RPi4b. Anyone else have this issue? I can't get any of the screenshot apps to work either. Could this be related to the X11 problem? I stll have to connect my Pi to my radio in order to complete my evaluation. More later. Addendum: Pi-Apps does not install VARA FM. I used an old YT video from KM4AC about installing VARA on Linux and successfully installed both VARA HF and VARA FM on my Lenovo Laptop running Ubuntu Linux. I hope his instructions are still up to date. I will try installing VARA FM on my RPi using these instructions.Wish me luck!

When working FT8, the frequency readout in WSJT-X will jump all over the place while transmitting. The radio is unaffected and remains on frequency and FLDigi is usually unaffected. However on occasion it will close abruptly. Radio - Icom IC-706MKIIG, Antenna 80M EFHW, Computer PI-4. Any ideas? Paul AC7UT

I have a lenovo laptop running Mint. Decided to load 73Linux. Twice I have gotten to dialogue box prompt where it asks me to enter my sudo password. I do not know what it is looking for but it will not accept my password. What am I doing wrong? Only password I have ever set on the cptr is the sign in which I believe is also used as the sudo pswd. Thankfully I had made a snapshot in timeshift, so easy to reset to square one. Thanks for any help

I am trying to put together an APRS node on a new PI4 with 4GB with good heat management and power supply. I'm using FLRIG, rigctld, Direwolf, and YAAC. I'm running into a very frustrating problem. I flashed a new Raspberry PI Bookworm 64 system yesterday. I went through the installation of FLRIG, Hamlib (built from source from Github), Direwolf (built from source from Github), and YAAC. Got it all working as expected. Worked beautifully overnight and this morning. I shut it down to make some shack changes. When I restarted the system, at "rigctld -m 4" I got a segmentation fault. I spent a couple of hours trying everything I could think of to resolve the issue, but it persisted. No luck at all. I finally decided start from scratch. I got a new microSD card (SanDisk Extreme 32GB) and flashed it with the Raspberry Pi 64 bit OS, Bookworm, using the Raspberry Pi flasher. Then I did a completely new install of all of the software pieces - FLRIG, Hamlib, Direwolf, and YAAC. It came up and ran fine for about 3 restarts. Then - SEGMENTATION FAULT again when I ran rigctld. Now that whole installation can no longer be used. Then I put that card in another PI4 (a little older one). Same issue. No joy. Any hints as to how to proceed on this one? Pascal AC7N

Hi all. This is probably my first time posting on this forum. I hope someone here my offer some help on this one. I have just set up Bookworm on 2 PI 4s to use for ham radio digital modes, including APRS. However, in the process, I discovered that I can't seem to get a screenshot. I have tried "scrot", of course. It puts a png file in my home directory, but when I open it with any image display program, it is just a black screen. I have tried this numerous times on both computers with the same results. I tried displaying the png file with several different programs, but nothing but black. Then I installed "gnome-screenshot". It runs, but throws an error saying that it couldn't take a screenshot, even though it tried all different ways (paraphrased). Anyone have any idea what's going on, or a recommendation to take screenshots? Pascal AC7N