开云体育

Thanks Joel. I will try that. I was hoping to find the drivelevel that is built into ARDOP. In the normal version, it is defaulted at 90. I normally run it between 47 to 53 to get ALC about 1 tick on

Are you using the latest ardopc from John's site? I sent him this patch for that, which I think he incorporated.? It chops off the dead air at the end of a transmission and increases the polling

Is there a way to shorten the hang time of ARDOP? I have noticed this with ARDOP as installed by 73Linux in Mint on both my IC-7300 and IC-705. It's almost like my transmitter is on for about .5 sec

I've not had any luck using alsamixer with my IC-705 in Mint. The only thing alsamixer identifies is the HDMI sound. Yes, I've tried hitting F6 to select anything different - my Linux install does not

I use alsamixer to control my usb in/out audio levels.? ?From a terminal window enter alsamixer and it will open the utility.? F6 allows you identify the available audio devices.? ?I am using a

hello all. is there a way to do a total uninstall of 73Linux and start all over without having to wipe the entire sd card? after many months of trials, reading, watching videos,,, the PAT app just

Computer:Evolve III Maestro 11g Hamtools:73Linux OS: LinuxMint Virginia upgraded from Vanessa using mintupgrade Radio: IC-705 When I launch ARDOP from Pat-Menu using the IC-705, I’m over driving the

Computer:Evolve III Maestro 11g Hamtools:73Linux OS: LinuxMint Virginia upgraded from Vanessa using mintupgrade Radio: IC-705 I’m trying adjust audio capture levels so VARA-HF, VARA-FM, ARDOP,

Yeah... something's not geehawing in my setup. I have restored from a very early backup after configuring my system and, after deleting the 73Linux folder, have re-run the 73Linux script. I don't

Mike, I thought I would give MX Linux a try on my 8G PI5. Install went ok. Then tried 73 Linux. I installed a few programs some loaded ok. I installed Aprsis32. I then tried to add it to the HamRadio

I can confirm that in that my case on the Evolve III Maestro 11G laptop. ?That installing LinuxMint 21.0 Vanessa and then 73Linux. ?Will get everything working. ?Then I ran mintupgrade to 21.3

Kelly, CM108...I have read that as a packet to install for direwolf.? But I think it should come with direwolf.? I have a fresh install of bookworm 64 and Direwolf.? Right now searching for install

Ok. This is embarrassing but a reboot fixed it :) Thanks, John, W0BCQ

Sounds good. I had not thought of downgrading and stepping back into the latest. Let us know how it goes. Joel - W4JBB

I had a similar issue this week and with Direwolf on Linux Mint 21.3. However, I reinstalled Vanessa and these are working. I’m going to try and step forward the upgrades of Linux Mint to Virginia

Mmm... If your arecord -l and aplay -l commands show card 1, device 0, I don't think card 3, device 0 will work for you (unless you have a device with those parameters). Unless it's a themes, fonts,

Why is there a? (? .? )? in the ARDOP path in the example below? That does not show up in Jason's example. Ed, KD9FRQ

On my Linux Mint desktop, the result of arecord -l and aplay -l indicate the USB codec for my 7300 is Card 1, device 0. I will try plughw3,0 and see what happens 73, John, W0BCQ

Odd. On my Wo-We, I have /usr/local/bin/ardopc64 8515 plughw:3,0 plughw:3,0 in the ARDOP Command in Pat Menu Settings and it opens without issue. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack

Your pat server (pat service) isn't running in the background like it should be. What happens if you start pat from the command line with: pat http I'll guess it produces errors and won't start. This