开云体育

Never consider it a time waster... consider it a learning experience. Just because you are just getting into this, doesn't mean it is your fault. You learn by trying, and if you run into issues, that

Kelly - thank you! I’ve decided to start over. Wiped the hard drive and re-installed Linux Mint. I will probably just buy Evolve Maestro to run VarAC. (Gosh. This was a time-waster extraordinaire -

Re reading your error blow away your wine drive environment and start over in 32bit (delete one profile and set a new one up) the virtual wine environment you made is 64 and you may have already went

You will not be able to run any scripts as part of this project I don’t think — ?for vara they are all broken in latest bookworm and buster due to a few things (see the vara sticky post in

warning: wine cmd.exe /c echo '%AppData%' returned empty string, error message "wine: WINEARCH set to win32 but '/home/tim/.wine' is a 64-bit installation." I need some help fixing this error, please?

Conky at the moment appears to have no development they never adopted Wayland k

My "Conky" is a black monolith, like from the movie "2001". Happened after an update scan. Any idea's ??

Has anyone made the above work using a Digirig? I also have the factory programming cable as an option. Thanks in advance Chris ZL2TCH

Just figured your message out….you have run config. Is your gps hooked up and working?

What happened when you ran Pat.config?

ire Wolf version 1.7 Includes optional support for:? cm108-ptt Reading config file direwolf.conf Audio device for both receive and transmit: plughw:3,0? (channel 0) Channel 0: 1200 baud, AFSK 1200 &

I assume you’re trying to set up xastir now? “ *nothing to enter in xastir” * https://youtu.be/95oKQTNP9s0 ( https://youtu.be/95oKQTNP9s0?si=vNBdFg8Hol9SoLvv ) * *

I'm not understanding what you're saying but I'm at work right now so not looking at a Pi. I can tell you that everything you need to setup your radio and xastir is on the video I sent you the link

**** List of CAPTURE Hardware Devices **** card 3: CODEC [USB AUDIO? CODEC], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 Direwolf entry:? ?ADEVICE? plughw:3,0

ire Wolf version 1.7 Includes optional support for:? cm108-ptt Reading config file direwolf.conf Audio device for both receive and transmit: plughw:3,0? (channel 0) Channel 0: 1200 baud, AFSK 1200 &

Direwolf is the (software) TNC. To find the soundcard, open a terminal window and type: arecord -l Find your soundcard on that list and edit direwolf.conf to point to the soundcard you found. Watch

Got that Parr.? Uncooment on pitt.? But no tnc shows up.? It just shows 8000 and 8001 is ready.? No sound cardSent from my T-Mobile 5G Device

Im running a pi4b

No one mentioned which Pi OS (Bullseye, Bookwork, etc) is being run. I used 73Linux on Pi 4 Bookworm 64bit and xastir installed as it should. 73Linux is the successor to BAP and can be run on top of

you need to install winlink manually vara download location changed fyi winlink now hosts the binary package vara and all winlink can be downloaded with this one liner wget -r -A "*.zip"