开云体育

Dave, Okay, thanks. ?I brought it down to 50. ?Still no joy - but I'm receiving on my HT and the PiGate. I may just have to drive over the local repeater and walk my way back to the QTH to see if

All looks fine to me other than menu 37 DIG GAIN, unless your sound card has a very low output or you have volume OUT set very low in software you shouldn’t need to use 100. This may be your issue,

I have Ardop Modem working like a charm. Packet Modem won't engage PTT. When I choose Packet Modem I see Direwolf is started and get the message that Packet Modem has started. I see my frequency in

Dave, Scott, Good morning! ?I have a DIN-to-3.5mm cable. ?I've got the 3.5mm ends connected to the in/out of the sabrent sound card, and the DIN part is connected to the data port on the 857D. ?I

The Find Gateway feature in Pat Menu needs work concerning Packet Searches. Currently it ignores the "Grid to Search" & "Band to Search" boxes. Instead, it looks for closest gateways to your station

Hi Michael, 73 W4YAH Bill

This is an issue that pops up now and again. See https://github.com/km4ack/pi-build/issues/34 for the fix. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar (

The option to download gateways near my location doesn't work for 2M&70CM (packet or ardop) when i choose my grid JO. It only shows US grids. When I do the same for 20 or 40 meter it does work fine.

Hi Grant, is that correct, are you using the Mic input? If so it’s going to be using the Mic VOX menu 88 if memory serves me. This is not the best way to operate any data mode as the Mic input

? Happy 4th, everybody! I just did a full Build a Pi v3, install on my RP3B+ with a fresh, updated copy of Buster. I installed everything, rebooted and plugged in my GPS(Vk-172), and I’m not

I fired up my unregistered copy of DaveCAD this weekend and this is the circuit that I'm going to try for direct cat control with the pi. I don't remember if I needed the extra diode on the rx line

So the the output of the 857 to the mic input adapter do you do the ptt line via /dev/ttyusb0?? That's sounds interesting -- Sent from Yahoo Email App for Android

Thanks Dave. When I try in FM mode, Vox or no Vox, the radio keys but no tones are transmitted. ?And Vox is not selectable in Packet mode. Weird thing I just saw. ?I'm running a PiGate for APRS

I think it’s related to the serial ports on the Pi4. Not sure what it is exactly, but I ran the same dongle in my Pi3 and Pi4 for 24 hrs each. Output the data from Gpsd into a file and compared the

The SSD thingy is not working. I think I will go with the same direction as @KM4ACK by omitting the SSD completely and just use the microSD -- 73 de Eugene / ZR4EM

Sorry could have been clearer, the good thing about the Digital VOX on the FT857 is unusually it works in FM Mode, thus is what you use. 73 de Dave G7HJX

I had the opposite problem. I tried to run Build-a-pi without running sudo apt update and sudo apt upgrade, and got thoroughly messed up with things missing and had to start from scratch. -- =Gary

I know a lot of people here run field radios using battery packs, so I thought the group might find this helpful, especially if running lipo batteries. If you need a low voltage shutoff for your

I'm decoding some packets on 144.390; weird though, when I tried to transmit a message with PiAPRS I got "Can't use rig_set_ptt for channel 0 PTT because rig_open failed."

Glad you fixed your PTT issue! There was an easier way with the FT857, use Digital VOX menu 40 unlike FM and SSB there is no hang time. Dave G7HJX