Dave, Scott,
Good morning! ?I have a DIN-to-3.5mm cable. ?I've got the 3.5mm ends connected to the in/out of the sabrent sound card, and the DIN part is connected to the data port on the 857D. ?I also have another cable going from the Pi to the cat/linear port.
Here are my current menu settings:
001 - EXT MENU - ON
002 - 144MHz ARS - ON
003 - 430MHz ARS - ON
004 - AM&FM DIAL - ENABLE
005 - AM MIC GAIN - 31
006 - AM STEP - 5KHz
007 - APO TIME - OFF
008 - ARTS BEEP - OFF
009 - ARTS ID - OFF
010 - ARTS IDW - YAESU
011 - BEACON TEXT 1 - 1
012 - BEACON TIME - OFF
013 - BEEP TONE - 440HZ
014 - BEEP VOL - 5
015 - CAR LSB R - 0Hz
016 - CAR LSB T - 0Hz
017 - CAR USB R - 0Hz
018 - CAR USB T - 0Hz
019 - CAT RATE - 4800bps
020 - CAT/LIN/TUN - CAT
021 - CLAR DIAL SEL - SEL
022 - CW AUTO MODE - OFF
023 - CW BFO - USB
024 - CW DELAY - 250ms
025 - CW KEY REV - NORMAL
026 - CW PADDLE - ELEKEY
027 - CW PITCH - 700Hz
028 - CW QSK - 10ms
029 - CW SIDE TONE - 50
030 - CW SPEED - 12wpm
031 - CW TRAINING - N:
032 - CW WEIGHT - 1:3.0
033 - DCS CODE - T=023
034 - DCS INV - Tn-Rn
035 - DIAL STEP - FINE
036 - DIG DISP - 0Hz
037 - DIG GAIN - 100
038 - DIG MODE - USER-U
039 - DIG SHIFT - 0Hz
040 - DIG VOX - 50
041 - DISP COLOR - FIX:14
042 - DISP CONTRAST - 5
043 - DISP INTENSITY - 3
044 - DISP MODE - AUTO2
045 - DSP BPF WIDTH - 240Hz
046 - DSP HPF CUTOFF - 100Hz
047 - DSP LPF CUTOFF - 6000Hz
048 - DSP MIC EQ - OFF
049 - DSP NR LEVEL - 8
050 - EMERGENCY
051 - FM MIC GAIN - 50
052 - FM STEP - 5KHz
053 - HOME-->VFO - ON
054 - LOCK MODE - DIAL
055 - MEM GROUP - OFF
056 - MEM TAG
057 - M/V/SEL DIAL GROUP - MHz/MEM GRP
058 - MIC SCAN - ON
059 - MIC SEL - RMT
060 - MTR ARX SEL - SIG
061 - MTR ATX SEL - PWR
062 - MTR PEAK HOLD - ON
063 - NB LEVEL - 50
064 - OP FILTER 1 - FIL1
065 - PG A - MONI
066 - PG B - Q. SPL
067 - PG C - ATC
068 - PG ACC - MONI
069 - PG P1 - Q. SPL
070 - PG P2 - TCALL
071 - PKT 1200 - 100
072 - PKT 9600 - 50
073 - PKT RATE - 1200bps
074 - PROC LEVEL - 50
075 - RF POWER SET - 50
076 - RPT SHIFT - 0.00MHz
077 - SCAN MODE - TIME
078 - SCAN RESUME - 5
079 - SPLIT TONE - OFF
080 - SQL/RF GAIN - SQL
081 - SSB MIC GAIN - 50
082 - SSB STEP - 2.5KHz
083 - TONE FREQ - T:127.3
084 - TOT TIME - OFF
085 - TUNER/ATAS - OFF
086 - TX IF FILTER - BLANK
087 - VOX DELAY - 100ms
088 - VOX GAIN - 50
089 - XVTR A FREQ - 145.030.00
090 - XVTR B FREQ - 145.030.00
091 - XVTR SEL - OFF
Not sure if it matters, but I also installed this:
Yaesu TCXO-9?
I don't think it's a range/elevation thing either.
