开云体育

Got it Thanks again

Thanks a million?? It worked like a champ

Please can anyone assist with using a Bluecat Bluetooth adapter? it pairs with the RPi4 but gives a message saying that “no services are supported on the Raspberry Pi”. I have used the adapter

I thought I had that written into the update script ( https://github.com/km4ack/pi-build/blob/master/update#L86 ) but it sounds like I need to take another look. It should give you a warning that you

Yes, exactly.? If BAP Update doesn't have a valid Internet connection it can't read the current version number and then defaults to trying an update which deletes the folder and stops there.? It

After a ton of grief and tears, I finally realized that it seems the Pi 4 will not properly load the audio devices if there is no HDMI attached. The work-around is this: In /boot/config.txt uncomment

I just watched Jason's video on the Ultimate Raspberry Pi install. I had a slightly different approach that worked a treat, and was a little simpler. I thought I'd share... I had the Raspberry Pi 4,

My problem is only similar to the main issue of this thread. I am running a Signalink to an Icom 7600. Don't want to mislead, no 705 here, unlike Jason. ?:-) Les

I’m using the IC-705 and Build-a-pi. ?If you have a high quality data cable, you should not need the signalink. ?I’m using the RT systems USB data cable for the 705 and it works great. ?For

Not an option. My only choice is Volume control settings. That produces a window that has Audio Card as a drop down menu. But any choice I make there does not stay. I see USB AUDIO CODEC, but it

It sounds like the lack of an internet connection is when this happened. Am I understanding that correctly? -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar (

Right click on the speaker icon in the top right corner of the desktop. Then select the default sound card. A check mark will be beside the one selected. -- 73, de KM4ACK YouTube (

Many of the apps you are using require Hamlib (WSJT-X, JS8Call, etc.) For those, if you want to use FLrig, you select Hamlib Rig ID #4 (which makes Hamlib it use FLRig instead).

Slightly related question:? Is HamLib required to run FLDIGI (specifically FLRIG for WSJTX and JS8CALL)? The Hamlib application seems to have a number of bugs and I'd like to just get rid of it. I

I've also tested the patch tool and it seems to work as explained here (allows patch one time, not subsequent times).

Hi Paul, The "txcvr" script works great on the IC-7300 without any modification! For those who may need help: cd ~ nano power.sh [paste the script into this document, CTRL-X, Y to save and quit] chmod

If you can connect P2P then you should be able to connect to a gateway. Be advised that if either compose a message as a P2P message or try to connect to a gateway as a P2P, what you are saying is

I have various scripts for the IC-7300 that run on the Raspi. They can turn the rig on/off, set the power level,? data modulation,? etc. Not much help if you are using Windows.? Have a look at

I have something similar going on, but using a Signalink souncard. In raspy-config I don't see an option for default sound source of USB. I see only HDMI or 3.5mm jack. Any ideas? Les WD5 BYQ

Well, the saga continues. I was successfully able to pass P2P messages between two window machines running winlink, to signalinks to identical kenwood TM-g707's.? I was also able to pass traffic