开云体育

Hi Mike, I will try to do it again during the coming weekend. VNC Viewer is no longer a 'thing', it has been replaced by 'Raspberry Pi Connect'. The whole thing might be a dodgy card although I have

Hey Jeremy, I used the signalink with the 2980. The signalink has VOX built in and handles the PTT in my setup. I don't necessarily recommend the signalink but it was what I had on hand when I built

Nice, wish I had the experience with the hardware TNCs – very cool! Closest I ever got was a 14.4 baud modem on my IBM compatible. I’ve set up the bpq.cfg file per KM4ACK’s video –

Linbpq has bpq.cfg file. This is where you add your winlink info and your radio info. When I ran BPQ, soundcards like Signalink were just coming out. I ran hardware tnc. 73 *Don PoapsNew

Ya, I know Craiger KM6LYW is running direwolf in the background of his digipi build. Not sure if it’s using hamlib for the PTT? Denis with Digirig mentioned that the Digirig Mobile (newest

Ok. You're using the Mic and Speaker. You have some audio adjusting to do. Playback is TX Run squelch open. Adjust the playback so it's not overdriving the radio. Have you loaded

Hey Don, This is what I’m working with. Got a Digirig Mobile interface box and USB A to C cord.

The IC 2100, if I'm not mistaken, has a 3.5 plug for programming. I never thought of using that plug for FLrig. If the radio vfo can be used, one would have to make a patch cable to run the data on

Jason, how do you work linBPQ for a Winlink gateway when the IC-2100 doesn't work with FLrig.? I bring up PAT, winlink packet modem, and it prompts me to setup FLrig. You showed a radio FT-2890 using

You aren't the only one having an issue. I incorrectly assumed in the beginning that it was only a minor setting that was incorrect. Looks like the problem is unrelated to 73Linux and is a

I bought one of the WOWE mini computers like Jason has the video. I did everything git hub to KM4ACK, copied the install commands and even went back and installed git. It all finished and just set

At this point, I am abandoning the Pi for anything other than packet and JS8Call. I have set up a more robust PC running Linux Mint and 73 Linux. ?VARA and Pat are communicating unlike before. I am

Yes I did

Not related to Linux but had similar problem the last few days with Windows and WSJT-X. I was only getting half to a 1/3 audio out as noted on older sound control panel. I updated to the newest

No transmit power with WSJT-X on RPI 3 running bullseye using FT857D and Digirig , I believe it's low/no input into the RPI but can't seem to fix it :( I've been using my laptop with WSJT-X with no

I rolled back to a previous image and VARA is no longer showing black panes. Still no Tx.

*NOTE* that the Raspberry Pi 5 normally requires USB-C Power Delivery protocol (PD) to operate. The PD spec only requires 3A at 5 volts, but the RPi5 bends the rules and requests 5A at 5.2V from the

I'm using this one on my 3D printer for a Pi zero 2W with no problems, but that load will not stress it like a Pi5 would. https://www.amazon.com/gp/product/B01NALDSJ0/?th=1 73 Steve, KM5HT

I have been using one of these in 3 different go boxes I’ve built. For the last 3-4 years they have given me no problems, and I like them because the voltage ?and amperage is adjustable. Keep in

FLRIG keys the radio.