Re: Baofeng uv5r, Direwolf and YACC Not Transmitting
I clicked on the sound icon on the upper right hand corner of the pi's screen and slid volume bar up.
On Feb 8 2022, at 6:50 pm, Paul KI5MIV <pmaine@...> wrote: How did you do that?
|
Re: Baofeng uv5r, Direwolf and YACC Not Transmitting
|
Re: Baofeng uv5r, Direwolf and YACC Not Transmitting
When I had trouble transmitting, the volume on my pi was too low. Try turning up the system volume on your pi.
On Feb 8 2022, at 6:34 pm, Paul KI5MIV <pmaine@...> wrote: My BAP has been setup as a digipeater, iGate and beacon. Every thing is working except my Baofeng doesn’t transmit. I’m using a btech cable and usb sound card. im using YAAC to send a message and want it to be transmitted via RF. I select via TEMP-1 in YAAC. The message is transmitted through the iGate. I have tried two different Baofengs with the same result. I have tried VOX settings from 1-10 and I still can’t get the HT to transmit.
what am I doing wrong?
|
Re: Heads-up for Canadian Miady battery
toggle quoted message
Show quoted text
On Tue, Feb 8, 2022 at 7:07 PM Terry Hunt <Terry@...> wrote:
Ok, I must have missed a video, who is Julian and does someone have a link?
?
?
terry
--
|
Re: Heads-up for Canadian Miady battery
toggle quoted message
Show quoted text
On Tue, Feb 8, 2022 at 7:07 PM Terry Hunt <Terry@...> wrote:
Ok, I must have missed a video, who is Julian and does someone have a link?
?
?
terry
|
Baofeng uv5r, Direwolf and YACC Not Transmitting
My BAP has been setup as a digipeater, iGate and beacon. Every thing is working except my Baofeng doesn’t transmit.
I’m using a btech cable and usb sound card.
im using YAAC to send a message and want it to be transmitted via RF. I select via TEMP-1 in YAAC. The message is transmitted through the iGate. I have tried two different Baofengs with the same result. I have tried VOX settings from 1-10 and I still can’t get the HT to transmit.
what am I doing wrong?
|
It has been a while since I flashed KM4ACK Build a Pi. Although I've watched videos etc. Trying to modify the BAP PI via VNC using my Android Pad. What I can do on te desktop I can't seem to do on the Android.
I see port 8080. I thought It was 5000. I need to use my Toughbook tomorrow. I did get FLrig and JS8call. I did try and connect with a station. I only say 2 stations. Quite a few did pick up my 40 M Hamstick and 20-watt Xiegu G 90.
73
Don Poaps
New Westminster, BC
VA7DGP DATA VA7QU ? VOICE Winlink: va7qu@...
Subject://wl2k ? ? ? ? ? ALLSTAR ?530780 Hamshack Hotline 5971 Mid-Island Phone Mesh 2210 2232
? ? ? ? ? ? ? ? ? ?
|
Re: Docker Pi Power Board SW Install Error -- SOLVED
Need to install WiringPi. All the sources said that this is supposed to be part of the normal RasPi install. Per
Just a quick post to let you know that you’ll need a new wiringPi for the Raspberry Pi 4B.
To upgrade:
cd /tmp
wget https://project-downloads.drogon.net/wiringpi-latest.deb
sudo dpkg -i wiringpi-latest.deb
Check with:
gpio -v
and make sure it’s version 2.52. I’ll push the updated sources shortly.
Reinstall the software for the Docker Pi Power Board and it worked.
|
Re: Docker Pi Power Board SW Install Error
Seems that /usr/lib/libwiringPi.so is missing. Trying to find how to install
systemctl status powerboard_daemon.service
● powerboard_daemon.service - GeeekPi Power On/Off Board
???? Loaded: loaded (/etc/systemd/system/powerboard_daemon.service; enabled; vendor preset: enabled)
???? Active: failed (Result: exit-code) since Tue 2022-02-08 18:53:47 CST; 1min 5s ago
??? Process: 3872 ExecStart=/usr/sbin/powerboard_daemon & (code=exited, status=127)
?? Main PID: 3872 (code=exited, status=127)
??????? CPU: 4ms
Feb 08 18:53:47 AK4NG-pi4B systemd[1]: Starting GeeekPi Power On/Off Board...
Feb 08 18:53:47 AK4NG-pi4B powerboard_daemon[3872]: /usr/sbin/powerboard_daemon: error while loading shared libraries: libwiringPi.so: cannot open shared obj>
Feb 08 18:53:47 AK4NG-pi4B systemd[1]: powerboard_daemon.service: Main process exited, code=exited, status=127/n/a
Feb 08 18:53:47 AK4NG-pi4B systemd[1]: powerboard_daemon.service: Failed with result 'exit-code'.
Feb 08 18:53:47 AK4NG-pi4B systemd[1]: Failed to start GeeekPi Power On/Off Board.
|
I just hooked up two hdmi monitors to my RPi 4. I am running BAP and WSJT-X. I did have to do a file edit to get my usb sound card to be usable.
Randy
VE3YRG
|
Re: Heads-up for Canadian Miady battery
Ok, I must have missed a video, who is Julian and does someone have a link?
?
?
terry
?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of
N5VMO Pat via groups.io
Sent: Tuesday, February 8, 2022 5:12 PM
To: [email protected]
Subject: Re: [KM4ACK-Pi] Heads-up for Canadian Miady battery
?
Same here Mike !??? I wonder where he got the idea to build the pack /-)
Same here Terry
***
"I still need to read the weekly mail but for someone who needs a mobility unit to get around, I may have
to order more ?"
***
Terry
When I can get the 25A cells delivered to my area .... I will build my chair's battery pack and charging
system like Julian did =)
?
On Tue, Feb 8, 2022 at 4:01 PM Michael Frachel <KO4BCN@...> wrote:
Something is wrong with their dimensions or the picture in that Walmart link.? The dimensions show a cube, picture shows it longer than it is wide.
I'll stick with my OH8STN inspired home built pack with integrated cell controller.
mike
KO4BCN
?
--
|
I am about a year in to using? RPi's.? Very new to Linux.? I have been wanting and trying to understand the whole set-up and steps of getting connected.? I am not using rig control and want to connect to local VHF nodes/gateways. However, i am at a loss.? I have tried many times unsuccessfully and have just walked away.? I am determined to learn how to do this.? Any help is appreciated.? I would like to create a step by step list of how to connect and send, etc.
|
Re: Docker Pi Power Board SW Install Error
Tried new link (from last message) and still get same error message at end of install
|
Re: Heads-up for Canadian Miady battery
Same here Mike !??? I wonder where he got the idea to build the pack /-)
Same here Terry
***
"I still need to read the weekly mail but for someone who needs a mobility unit to get around, I may have to order more
?" ***
Terry When I can get the 25A cells delivered to my area .... I will build my chair's battery pack and charging system like Julian did =)
On Tue, Feb 8, 2022 at 4:01 PM Michael Frachel < KO4BCN@...> wrote:
Something is wrong with their dimensions or the picture in that
Walmart link.? The dimensions show a cube, picture shows it longer
than it is wide.
I'll stick with my OH8STN inspired home built pack with
integrated cell controller.
mike
KO4BCN
?
|
Re: Heads-up for Canadian Miady battery
Something is wrong with their dimensions or the picture in that
Walmart link.? The dimensions show a cube, picture shows it longer
than it is wide.
I'll stick with my OH8STN inspired home built pack with
integrated cell controller.
mike
KO4BCN
On 2/8/2022 4:28 PM, Terry Hunt via
groups.io wrote:
toggle quoted message
Show quoted text
Thanks Don,
?
I still need to read the weekly mail but
for someone who needs a mobility unit to get around, I may
have to order more
?
?
Terru
?
?
I did a Google search after I
received?Jason's weekly email.?
Don Poaps
New Westminster, BC
VA7DGP DATA
VA7QU ? VOICE
Winlink: va7qu@...
Subject://wl2k ? ? ? ? ?
ALLSTAR ?530780
Hamshack Hotline
|
Re: Heads-up for Canadian Miady battery
Thanks Don,
?
I still need to read the weekly mail but for someone who needs a mobility unit to get around, I may have to order more
?
?
Terru
?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of
Don Poaps via groups.io
Sent: Tuesday, February 8, 2022 11:09 AM
To: [email protected]
Subject: [KM4ACK-Pi] Heads-up for Canadian Miady battery
?
I did a Google search after I received?Jason's weekly email.?
Don Poaps
New Westminster, BC
VA7DGP DATA
VA7QU ? VOICE
Winlink: va7qu@...
Subject://wl2k ? ? ? ? ?
ALLSTAR ?530780
Hamshack Hotline
|
Heads-up for Canadian Miady battery
I did a Google search after I received?Jason's weekly email.?
Check this out.
73
Don Poaps
New Westminster, BC
VA7DGP DATA VA7QU ? VOICE Winlink: va7qu@...
Subject://wl2k ? ? ? ? ? ALLSTAR ?530780 Hamshack Hotline 5971 Mid-Island Phone Mesh 2210 2232
? ? ? ? ? ? ? ? ? ?
|
I'm using dual monitors on my setup with the PI4 and BAP.?
Haven't ran into any issues with it.? Occasionally the Pi won't
boot to the windows interface but I can ssh into it and reboot it,
haven't figured that out, but I don't think its related.
mike
KO4BCN
On 2/8/2022 5:08 AM, Michael Starling
via groups.io wrote:
toggle quoted message
Show quoted text
Am pretty much committed to dual monitors for the shack running a
RP4.? Would like to be able to use RP3s in the field with no
internet connection with the sourcing the Wifi to allow a tablet
to be console using VNC.
The last time I built a BAP system it was not possible to get a
second monitor to run.? So I moved to Ham-Pi for the shack.? Can't
get the wifi sourced for field use.
Frankly, I like the system utilities and CONKY available in the
BAP build.
Has anyone solved dual monitor problem I saw with BAP?
Thanks!
Mike
_._,_.
|
Re: BAP Direwolf and YAAC?
Add a AGWPE port to YAAC and it should read the data from direwolf. The port number will be 8000. ? --
73, de KM4ACK
|
|
|
Re: Pulse Audio and Direwolf?
Yes. I run it with pulse without issue. --
73, de KM4ACK
|
|
|
N5VMO Pat
Don Poaps
Mark Earls, K7MEE
km4ack