开云体育

Jeff, this should be a new thread so we don't detract from the original thread concerning a grid square and pat, however im guessing you have SES loaded as part of your BaP build?? If so check out

I just got this spam error when I updated BAP, Pat & Pat Menu just now. Now Pat doesn't load as it normally did. "This site can’t be reached ?127.0.0.1 refused to connect."

I continue to get the "grid square not set in pat configure" and I've been through all the recommended fixes I can find in this group. I've started over from scratch reinstalling a new copy of

I assume this requires 5.1V the same as the pi. Or is it 12V? Marty kd8bj

I use this for

Greetings. When I VNC into the Pi I am getting a desktop, but conky will not display. It displays on the Pi monitor but not the remote? monitor. Is there a fix for that? Thanks for your help.? -Fred

Here is a screenshot listing of errors I get when BAP updates.? Please help. Jeff KO4NCC

iPads are a good option. N3WS showed on his YT channel www.waveshare.com where he purchased a small standalone screen for his Pi. Thanks & 73. Jeff K3JRZ Email <K3JRZ.Jeff@...> ●

I use an older Ipad. You might have to learn a few touchscreen gestures but it works fine for me.I think you can find plenty of Used Ipads on ebay. ?The battery lasts all day, sometimes approaching

Yes Vic. Thats' what I did -- so all my hard work configuring the original zero was not in vain! I did to the usual 'update' and 'upgrade' and updated BAP and it all worked, first time 73 Bruce

Joe they make a 7" 1024 by 800 display (HDMI 4 Pi: 7" Display 1280x800 IPS - HDMI/VGA/NTSC/PAL <https://www.adafruit.com/product/1931> ) that is now discontinued that is the same size as the official

I have used a tablet in the past and connected to the Pi through VNC. For two months now, I have been testing a couple of all in one units. I showed the RasPad on the channel recently.

Are you using the serial KISS TNC? It is different from the serial TNC. The serial KISS TNC is the one I use for my digi. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar (

Hello again! I'm trying to build my own version of the perfect field/portable station for POTA, Field Day, and the like. I have an official 7" touchscreen display which works wonderfully for most

I start direwolf with command line "direwolf -p". I read with /pts it chooses. Then I start XASTIR and make sure the /dev/pts is correct. However, the device will not start. The network and gpsd will

I have a RPi-zero2 on the way. Question...can I just swap the micro-SD card from the RPi-zero I have and start right up, or do I need to build up from a fresh card? =Vic=

Good morning all. Yesterday, I successfully loaded and ran Build a Pi on the new $15 Raspberry pi zero-2W. Take a look at the build and controlling an IC-705 on my Youtube channel: Dr.T(G4ABX) I'll

Hi David, I had a similar experience with VARA on a Windows virtual machine running on Linux host by Virtualbox. It was a lag on the PTT line caused by a usb to serial adapted. If the adapter is

The BAP installation went smoothly on my RPI 4b.? I did have to play a little with gpsd configuration to get FLRIG and my gps dongle to work together.? I have become quite experienced at that,

I am not programmer. In this week have try to install build a pi forced to the laste version having different issues for the first time. in Flrig, Fldigi, Pat winlink, and the installation seems to do