开云体育

This is because of the Bullseye Raspbian OS. It needs recompiling of wsjtx with the new libraries. You can install an older version (2.3.0) via the apt command: apt install wsjtx or build wsjtx from

Here's a set of instructions for converting grid & get-grid (Ruby) to Python3 as a single call. Usable to connect to local gpsd or a networked machine running gpsd as a network server (how I use it).

as soon as i run the command and its a tnc3 -- Loyd C. Headrick WX4LH <http://wx4lh.com>

Your help is greatly appreciated thank you I will try that.? -Fred KD9CCE

It sounds like you are running two different resolutions depending on which monitor you are using. The varied resolution is what is creating the issue. The only solution I know of is to use the same

I did try, but got the same result. Thanks for your help!

More than likely it is a port issue. Check out this post /g/KM4ACK-Pi/message/6237 -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack

Try reinstalling WSJTX using BAP update tool. If that doesn't clear the issue, let me know and I will take a look this evening and do a bit of testing on my end. -- 73, de KM4ACK YouTube (

I don't use this kind of setup but I did a video on how to get it going. https://youtu.be/DBfyQRvOmag -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack

Thanks for the heads up John. I plan to take a look at the new Bullseye in the next few days. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack

Does it disconnect as soon as you run the rfcomm command? Is this for a Moblinkd TNC2 or TNC3? -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack

I don't run any monitors with a Pi so this is just a guess. Have you double checked the sound card in WSJTX settings to make sure it didn't change when you connected the second monitor? -- 73, de

Greetings, Jason and all: I have been for several weeks trying to get several Pis to take shared data from a master Pi running GPSD to use for conky and other purposes, but for the life of me can't. I

After start -from-scratch? building per https://github.com/km4ack/pi-build , I was unable to run wsjtx. I was prompted to update, but received this error : Any help/suggestions would be greatly

Hey Guys! I've found that Ham Radio Deluxe (HRD) can be used remotely with SSB. You just have to have it installed locally as a server and remotely as a client. Of course, this means two more Windows

It looks like with the new bullseye base that vcgencmd has moved for /opt/vc/bin to /usr/bin This impacts the temperature display in conky.? The .conkyrc file uses the path with /opt. John

i get this sudo rfcomm /dev/rfcomm0 34:81:F4:A2:45:DA Connected /dev/rfcomm0 to 34:81:F4:A2:45:DA on channel 1 Press CTRL-C for hangup Disconnected xastir serial kiss tnc will not start Loyd WX4LH

Thanks it wasn't obvious from the write up on Amazon. Marty kd8bj

Anyone had problems when you connect a second monitor to your Pi 4 ? When I connect a monitor I loose all inbound audio and ability to use WSJT-X. I am using the USB sound dongle for audio in an out

Thank you. It displays on the remote screen when started from Run. If the session is closed and reopened it will display. If the Pi is rebooted conky has to be restarted manually again. I tried a