开云体育

Pat seems to have some issues. It says it’s missing my grid square. I’ve tried to update it via Pat Menu. But when I try to start Pat via a bookmark or via Pat Menu it won’t display the

That is certainly odd. Try restarting conky from the pi menu after you VNC into the Pi. If that doesn't work, open the terminal and run: *sudo killall conky* *conky* and see what errors it

After updating, which application isn't working? -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter ( https://twitter.com/km4ack ) | Store (

works off 12v has a buck converter drops 12v to 5.2v input uses a 5.5mmx2.1mm plug Loyd WX4LH

Jeff, this should be a new thread so we don't detract from the original thread concerning a grid square and pat, however im guessing you have SES loaded as part of your BaP build?? If so check out

I just got this spam error when I updated BAP, Pat & Pat Menu just now. Now Pat doesn't load as it normally did. "This site can’t be reached ?127.0.0.1 refused to connect."

I continue to get the "grid square not set in pat configure" and I've been through all the recommended fixes I can find in this group. I've started over from scratch reinstalling a new copy of

I assume this requires 5.1V the same as the pi. Or is it 12V? Marty kd8bj

I use this for

Greetings. When I VNC into the Pi I am getting a desktop, but conky will not display. It displays on the Pi monitor but not the remote? monitor. Is there a fix for that? Thanks for your help.? -Fred

Here is a screenshot listing of errors I get when BAP updates.? Please help. Jeff KO4NCC

iPads are a good option. N3WS showed on his YT channel www.waveshare.com where he purchased a small standalone screen for his Pi. Thanks & 73. Jeff K3JRZ Email <K3JRZ.Jeff@...> ●

I use an older Ipad. You might have to learn a few touchscreen gestures but it works fine for me.I think you can find plenty of Used Ipads on ebay. ?The battery lasts all day, sometimes approaching

Yes Vic. Thats' what I did -- so all my hard work configuring the original zero was not in vain! I did to the usual 'update' and 'upgrade' and updated BAP and it all worked, first time 73 Bruce

Joe they make a 7" 1024 by 800 display (HDMI 4 Pi: 7" Display 1280x800 IPS - HDMI/VGA/NTSC/PAL <https://www.adafruit.com/product/1931> ) that is now discontinued that is the same size as the official

I have used a tablet in the past and connected to the Pi through VNC. For two months now, I have been testing a couple of all in one units. I showed the RasPad on the channel recently.

Are you using the serial KISS TNC? It is different from the serial TNC. The serial KISS TNC is the one I use for my digi. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar (

Hello again! I'm trying to build my own version of the perfect field/portable station for POTA, Field Day, and the like. I have an official 7" touchscreen display which works wonderfully for most

I start direwolf with command line "direwolf -p". I read with /pts it chooses. Then I start XASTIR and make sure the /dev/pts is correct. However, the device will not start. The network and gpsd will

I have a RPi-zero2 on the way. Question...can I just swap the micro-SD card from the RPi-zero I have and start right up, or do I need to build up from a fresh card? =Vic=