开云体育

I just looked and conky is being developed, AFAICT. the last release was 1.19.6 on Oct 2023. However the conky on my Linux Mint 21.1 is 1.12.2 Jerry ---- Extra Ham Radio Operator: WF5W Registered

You can’t have two instances the port in use ? nc or telnet to the service port 4532

Thanks Kelly. I have made an interesting discovery. I started over with a backup without Hamlib, and reinstalled. After installing Hamlib it worked as it was supposed to. I entered the following

Sounds like it’s not connecting to the radio is the serial speed correct it’s a unusual value Fiddle with the command till you get success? Is the radio a model correct? rigctld -m 1028 -r

Installed and running now 2 channels for signalink ADEVICE plughw:CARD=CODEC, DEV=0

Hello forum. I have a Pi 4B running hamlib. I installed it using the scripts provided by KM4ACK located at https://www.youtube.com/watch?v=BUeXSYYeB7Q. I set it to run as a rigctld.service. But I have

I don’t personally like Ubuntu, but try them all! nothing wrong with 64bit (it all should work) it’s just all VERY NEW, so it’s all different depending . (New is wine 9/wow64) If vara loads up

I am going to grab Wine-stable 23.08 and try with that. -- Tim Tyler I KI5OOS

Hi Kelly! Thank you! Yes, I did try as you note/instruct in your message linked. I got the old “You are running 64 bit version” message. Is there any advantage to reinstalling OS and using Ubuntu

Right, but getting it working is the challenging part. Everything in 73 Linux appears to depend on flrig being up and working. That depends on tx and rx audio, as well as cat control type stuff. I

The sbitx is just using a raspberry pi - you can load in whatever you want.

Hi Team, I love BAP/73 Linux. I recently came into posession of an sBitxv2. The UI is.. challenging.. to me. Is there any way we can get support for the radio in these utilities? Ideally keeping the

Hey Tim, did you check out /g/KM4ACK-Pi/message/12128 has the basic notes to get everything working and I tested on mint over the weekend should be good you need to use the WineHQ

Kelly - Wow. I see that you are a prolific author on the issues I’m experiencing and a very busy person. Thanks for taking the time to answer. New info: About six weeks ago, with a crappy old

Should work, raspian

I have two of these Le Potatoe 2GB boards that run Rasbian and Debian. Will 73 Linux work and what is the best OS to start with? Thanks! https://libre.computer/products/aml-s905x-cc/

Btw,? finally got it up and running Digipeating is happening.

Note:? model uses the mic and sound connections between the radio and signalink. *ADEVICE plughw:CARD=CODEC,DEV=0 ACHANNELS 2 MYCALL "CALLSIGN-0" MODEM 1200 * *AGWPORT 8000* *KISSPORT 8001* *PBEACON

Success!!! Info: https://www.seapac.org/workshop-presentations_files/SEA-PAC2017-RPi-workshop,session-2,APRS-direwolf-xastir.pdf Yes!!! ADVICE plughw:CARD=CODEC,DEV=0 this replaces the standard:?

So i was doing a demonstration at a local ham fest today about the capability of my go kit. When i tried to use the EES it kept adding to the IP address when i clicked on one of the links from the