开云体育

I just watched Jason's video on the Ultimate Raspberry Pi install. I had a slightly different approach that worked a treat, and was a little simpler. I thought I'd share... I had the Raspberry Pi 4,

My problem is only similar to the main issue of this thread. I am running a Signalink to an Icom 7600. Don't want to mislead, no 705 here, unlike Jason. ?:-) Les

I’m using the IC-705 and Build-a-pi. ?If you have a high quality data cable, you should not need the signalink. ?I’m using the RT systems USB data cable for the 705 and it works great. ?For

Not an option. My only choice is Volume control settings. That produces a window that has Audio Card as a drop down menu. But any choice I make there does not stay. I see USB AUDIO CODEC, but it

It sounds like the lack of an internet connection is when this happened. Am I understanding that correctly? -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar (

Right click on the speaker icon in the top right corner of the desktop. Then select the default sound card. A check mark will be beside the one selected. -- 73, de KM4ACK YouTube (

Many of the apps you are using require Hamlib (WSJT-X, JS8Call, etc.) For those, if you want to use FLrig, you select Hamlib Rig ID #4 (which makes Hamlib it use FLRig instead).

Slightly related question:? Is HamLib required to run FLDIGI (specifically FLRIG for WSJTX and JS8CALL)? The Hamlib application seems to have a number of bugs and I'd like to just get rid of it. I

I've also tested the patch tool and it seems to work as explained here (allows patch one time, not subsequent times).

Hi Paul, The "txcvr" script works great on the IC-7300 without any modification! For those who may need help: cd ~ nano power.sh [paste the script into this document, CTRL-X, Y to save and quit] chmod

If you can connect P2P then you should be able to connect to a gateway. Be advised that if either compose a message as a P2P message or try to connect to a gateway as a P2P, what you are saying is

I have various scripts for the IC-7300 that run on the Raspi. They can turn the rig on/off, set the power level,? data modulation,? etc. Not much help if you are using Windows.? Have a look at

I have something similar going on, but using a Signalink souncard. In raspy-config I don't see an option for default sound source of USB. I see only HDMI or 3.5mm jack. Any ideas? Les WD5 BYQ

Well, the saga continues. I was successfully able to pass P2P messages between two window machines running winlink, to signalinks to identical kenwood TM-g707's.? I was also able to pass traffic

I've been using FT8, Winlink and all other digital modes quite successfully with that hardware combination and the following radio settings: 05-06: CAT RATE: 19200 05-08: CAT RTS: DISABLE 08-01: DATA

I connected a hard? Ethernet cable wire after this happened to get a screen shot.? ?I was using a USB keyboard and mouse and a HDMI monitor

It happened again.? Screen shot included.? Note the mispelled "lateest" word and note that I had no wifi connection at the time BAP ran.? It booted up that way and later picked up an IP address.?

Never thought about this, but a great idea! I bet hamlib would hold the answer. I wish I could look into this further but I’m nearly underwater doing a forensic audit. ??? Cant wait to see

You may have deleted your BAP directory. You can reinstall BAP with the following commands: *cd* *git clone https://github.com/km4ack/pi-build.git * -- 73, de KM4ACK YouTube (

If you have 3.0.8 installed there should be a shortcut in the menu under the ham radio section. If it isn't there, you can run the BAP update script from the command line with *~/pi-build/update * The