开云体育

Follow the Mobi-Connect script and add the Bluetooth rfcomm0. I didn't use Pat Menu as the Bluetooth was not in the menu when I first got going with Build a Pi. Modify to add your Bluetooth device. If

Hey Sergey, I don't think this is possible. Direwolf is a software TNC and you have the bluetooth TNC. To my knowledge, you can't have 2 TNC's in the circuit. -- 73, de KM4ACK YouTube (

> > Ok gentlemen, I'm glad there is a group where I can ask a question. The > crux of the problem: I am a small Linux specialist, I have pi3 b +, with > installed programs from KM4ACK. There is a

I'm with Bob. I think that your new router needs to have DHCP turned on. Look for that setting in your router configuration. -- 73 de N5RKE

If the green light is flashing and you still have no date with "cgps" command, try reinstalling the GPS software using the build a pi script from the preferences section of the main pi menu. -- 73, de

I use an app on my phone called Fing (see attached puc), that shows ALL devices connected to my network, and the IP addresses and MAC addresses, this may help you find your Pis, maybe new toys changed

May I suggest the following. - Put back the original router, if possible, and start from there. - What was the result from the "ip scanner" ? (Your step no. 5); If nothing, I am guessing that the

Yes, green LED flashing as in past.

Thanks [email protected]> wrote:

I am not an experienced YAAC user, but I have many years of APRS experience with APRSIS32 and other programs on the PC.? I will say that APRS isn't something that is "turnkey" yet.? Due to its

I, too, run Build-a-Pi 3.0.3 on a Pi 3B+.? When I boot up, my GPS is assigned to "/dev/ttyACM0".? Occasionally, my pi changes the GPS to a different port, usually /dev/ttyACM1 or ACM2.? I suspect

I'm copying a post I made to the Raspberry pi ham radio group. I have installed BAP on two of the PI's and that may or may no be an issue. I need your help, Pi gurus. After I changed my router none of

Thanks I have to do so further testing

Do you have a green flashing light on the GPS? If not, this let's you know that the GPS doesn't have a lock on the satellites. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar (

No. I see that it is connected to ttyAMC1.? Still no joy. de KK&PW

Getting onto APRS.FI is not a function of the sending station EXCEPT for being heard. The way it works is your transmit and a station that is forwarding via internet to the APRS servers hears you.

Thanks for the info, I will check it out. Jeremy Pierce KM6QAQ Sent: Friday, August 28, 2020 10:18 AM To: [email protected] Subject: Re: [KM4ACK-Pi] Chromebook Jeremy, Chromebooks change rather

I have set up an aprs set up in my truck using a pi 3 with a signal link and GPS. I can follow my set on yaac but I don't show up? on aprs.fi maps. I'm sure I've missed a setting just can't figure it

I was having problems with mine. I used to have to unplug it and reseat it in order for it to start reading data. It has to have a clear line of site with the satellites so I installed a USB extension

If you run *cgps* in the terminal, do you get data? -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter ( https://twitter.com/km4ack ) | Store (