开云体育

Spend a few hours at the Smokey Mountain Knife Works, it has something for everyone. 73 Keith?KY4KS

Hi All, First, let me say that this is a great forum and I would not have been able to set up my Pi4 without the information contain herein! Conky on my pi4 w/4gb and the latest build (installed

Don, Thanks for the reply.? There is no VOX in EasyDigi. Alan K6ZY

Jason, Does BAP rely on VOX to key a transmitter (at least in VHF FM)?? The configuration menu(s) have a section for PTT.? Does this send a signal to the USB port to key the transmitter?? If so,

Thanks for the reply Jason. I have the software installed and should have my gos dongle tomorrow. I figured that was why it showed an error where the grid square normally would’ve be on conky.

Alan, From a quick search, it doesn't look like that rig is supported by FLRIG or rigctl. You may have to go with a sound card like the Signalink that has a VOX circuit built in that can key the rig.

Hey Bryan, This page https://tiny.cc/km4ack-faq ( https://tiny.cc/km4ack-faq ) has some help for 7300 owners. Scroll down to the section that reads "Can you help with radio X". There's a great How To

Is there VOX. As far as I know there's no vox in Easy Digi keyer Don va7dgp wrote:

I have set up Build-a-Pi and am trying to use it to do VHF Winlink.? However, I can't get it to key my FT-1500 xcvr via the data port.? I think the FT-8900 would be the same as they have the same

No, it does not. That’s the problem. James KA9VIG

Under "Choose Network", does RPiHotspot show up? You need to connect your mobile device to it and then VNC into the Pi using 10.10.10.10. I have had one RPi4 that had to go back due to the seller due

Kevin: As I understand it, BAP can tell if some apps need an update, but not all of them. If it can't it just says INSTALLED. But if you fire up an app and it says it has a newer version, you can

Good afternoon Jason, I checked my version of Chirp.? It recently updated using the BAP menu option.? Chirp reports it is ver 20200718.? I do not receive an update message when I start chirp.? I

I have the pi4 running v3 of pi build. I am having issues trying to get the 7300 to communicate with the pi. I know it’s a user error(id10t code)lol. Any help would be appreciated, any things to

You need to join the Raspberry PI. on the same network. log into 10.10.10.10 with wifi and VNC into 10.10.10.10. It works as I use it out in the car. later 73 *Don Poaps* *New Westminster, BC* *VA7DGP

Jason, Here is the output of BAP2 for my Chirp update.? I can manually download the upate from the CHIRP website so it appears there is an error with your building the request.? Here is the URL I

I rewatched the videos. I don’t see where I’m missing anything. Attached are photographs showing the hotspot is active and a screenshot showing it’s not in the list on my iPhone. Also, the RPi

Jerry, Please run *bash ~/pi-build/diagnostic * in a terminal window and follow the directions. I will be out most of the day but will look tonight to see if I can see anything that might be causing

I am having the same error.? My installed Chirp is at 20200711.? Pi 4 with 4 gig. Joe AF1E

I have watched those, but I will definitely watch again to see if I missed something. James KA9VIG