Keyboard Shortcuts
Likes
- HallicraftersRadios
- Messages
Search
1Re: TinySA Ultra follow-up
So is paying more gunna protect me any more?
?
Thomas, no.?
?
But I, for one, don't mind throwing a few extra bucks at a purchase from a US-based brick & mortar seller.?
?
Sure was nice to drive 10 minutes to Radio Shack for that switch, transistor,? or relay I needed for my project.?
?
YMMV
?
73,
Jeff
W8KZW?
?
Boatanchors since 1965 |
Re: TinySA Ultra follow-up
Ah, sorry for any misinterpretation... My Ultra is still working fine.? I haven't updated the firmware lately, but when I was teaching electronics at MSU, I bought 20 of the original TinySA's for student use. All from R&L, they also performed flawlessly... I used them for both, RF generation, and in put signal analysis.? The Ulta worked best for me as the display is larger! But, they both are excellent for AM signal 3 dB BW assessment and signal quality.? Nice for detecting stray RF and EMI/RFI too with a directional antenna. 73 Steve W8tow? On Sun, Dec 29, 2024, 6:02?AM Thomas K. Lanieri via <oemeoc88=[email protected]> wrote:
|
Re: TinySA Ultra follow-up
Hi ya,? I buy all my stuff from Aliexpress BUT I check the seller really carefully and buy from the original manufacturer where possible.? Paying more means zero, zilch, nothing in my experience.? I bought an ATU 1000 auto atu kit and researched the seller.? So good I bought another.? Both handle 1kw auto tune simply by speaking into the mike.? Anyway that is my experience so do what Walt says I think.? Cheers VK5LB?
toggle quoted message
Show quoted text
|
Re: TinySA Ultra follow-up
¿ªÔÆÌåÓýHEY ALL. ? TU all for sharing this info¡This clone stuff gives me hives! So RL want 140 + 14 s/h Zeenko and Alliexpress want 117 no s/h Zeenko and ALLIBABA is 110 no s/h ? A reasonable difference.?? So is paying more gunna protect me any more? ALL advice appreciated!?? TU!?? ? ? STAY SAFE AND STAY WELL! ? Respectfully, NJ DOH Licensed EMT;? PHTLS, AMLS, PHPEC Millenium EMS ARC N.E. BioMedical Services ARC N.E. Disaster Cycle Services ? From: [email protected] <[email protected]> On Behalf Of waltcates via groups.io
Sent: Saturday, December 28, 2024 11:25 AM To: HALLI IO GROUP <[email protected]> Subject: [HallicraftersRadios] TinySA Ultra follow-up ? From the TinySA official website. Where to buy. I guess the key is who made it. It seems that Zeenko is the authentic manufacturer. ? Safe places to buy an original tinySA
? ? ? Walt Cates, WD0GOF ? A majority of acceptance is not proof of correctness. ? |
Re: TinySA Ultra follow-up
Currently in stock at R&L
toggle quoted message
Show quoted text
|
Re: TinySA Ultra follow-up
¿ªÔÆÌåÓýSteve Then what happened?? Is it still in operation/functioning? ? STAY SAFE AND STAY WELL! ? Respectfully, NJ DOH Licensed EMT;? PHTLS, AMLS, PHPEC Millenium EMS ARC N.E. BioMedical Services ARC N.E. Disaster Cycle Services ? From: [email protected] <[email protected]> On Behalf Of Steve Marquie via groups.io
Sent: Saturday, December 28, 2024 10:14 PM To: [email protected] Subject: Re: [HallicraftersRadios] TinySA Ultra follow-up ? I bought one from R&L ... ? On Sat, Dec 28, 2024, 11:25 AM waltcates via <cateswa=[email protected]> wrote:
|
Re: CW Chirp
Hi Steve. It is good to hear from you. It has been a while since we last talked on the DX60 Net.?
?
I have cycled several 6BA6 tubes through the oscillator and tonight I repeated that exercise. I have one that sounds just a little better than the others so maybe a new tube would be worth a try. I thought one of the ones I had was NOS but it is pretty hard to tell.?
?
The 5MHz VFO signal looks good on the scope. It is a decent sine wave and looks the same with key down as it does with key up. At the key down transition I'm seeing some high frequency distortion but it only lasts for about two cycles of the 5MHz signal. It could easily be my scope picking up transients at that point.?
?
I now have solid state regulators on the VFO screen and plate. Hopefully some day I can take those out. This thing has been driving me nuts. It almost sounds OK but I'm just not quite satisfied with it.?
Thanks for your help. 73. Jerry - W0PWE |
Re: SX-117 HT-44 and PS-150-120 for sale
FYI, if the PS has a loud hum when in SSB but not talking, check the bias per the manual. On Sat, Dec 28, 2024, 7:40 PM Adam N0ZIB via <mradam79=[email protected]> wrote:
|
Re: TinySA Ultra follow-up
I bought one from R&L ... On Sat, Dec 28, 2024, 11:25 AM waltcates via <cateswa=[email protected]> wrote:
|
SX-117 HT-44 and PS-150-120 for sale
Looking to sell my SX-117-HT-44 set and my PS-150-120. Bought this set along with an SR-150 from a silent key ham friend, but really don¡¯t have the room for all of these.?
Comes with manuals and the connection cables for running both units together.
?
The power supply has a strong hum so i would think it needs recapped. The receiver is fantastic! Haven¡¯t used the HT-44 yet. I ordered the injection cables but never did set it all up.? ?
Asking $400 for all of it. ?Local pickup only please near St Louis MO. Can send plenty more pictures.? |
Re: Stuck ferrite coils
OK Bill. Bob W4JFA On Sat, Dec 28, 2024 at 6:04?AM Bill (Group Owner) via <k2wh=[email protected]> wrote:
|
TinySA Ultra follow-up
¿ªÔÆÌåÓý
From the TinySA official website. Where to buy. I guess the key is who made it. It seems that Zeenko is the authentic manufacturer.
Safe places to buy an original tinySA
Walt Cates, WD0GOF
?
|
Re: A good start
¿ªÔÆÌåÓýTo add to the fellows caution.? The reason for getting an authentic version is that firmware updates and some of the self-cal processes don't run properly on some of the clones.? I guess the thinking by these clone makers must be that the recourse to the seller is lost in the noise in the event of problems.? And that most users won't actually use it for serious work.? That must be true as there are a thousand out on the Aliexpress site making Amazon look somewhat tame by comparison.
Good luck! 73/jeff/ac0c alpha-charlie-zero-charlie On 12/27/2024 6:08 PM, waltcates via
groups.io wrote:
|
Re: Stuck ferrite coils
If it's stuck, most likely it cracked.? They crack and open up, that locks them in place.? The only way to get them out is pick out the pieces.? How did it get cracked (if it is), someone used an incorrect alignment tool. Good luck. Bill
On Friday, December 27, 2024 at 06:36:58 PM EST, Bob via groups.io <w4jfabob@...> wrote:
Hi all,
I know this is a generic question and there's many variables but I thought I'd try. What?are some of you guy's?tricks to free up stuck ferrite coils? I may have a stuck coil but I'm not sure. It's not in a Hallicrafters but I do know it's kinda a common thing. BTW, it's not from wax. Thanks, 73, and Happy New Year! Bob W4JFA |
Re: A good start
¿ªÔÆÌåÓýThanks.
? From: [email protected] [mailto:[email protected]] On Behalf Of waltcates via groups.io
Sent: Friday, December 27, 2024 7:08 PM To: [email protected] Subject: Re: [HallicraftersRadios] A good start ? Pete and the group, ? You have to be very careful where you order from. The designer and manufacturer of the TinySA recommend R&L electronics hear in the states. ? Amazon and E bay are loaded with clone knock-offs.? ? I would recommend visiting the TinySA groups.io site and do a little research before?you buy. ? Oh, Yes R&L Electronics price 149.95 shipping 10.95. ? ? ? Walt Cates, WD0GOF ? A majority of acceptance is not proof of correctness. ? ? From:?[email protected] <[email protected]> on behalf of Peter A Markavage via groups.io <pmarkavage@...> ? You didn't mention manufacturer or where you got it. On Amazon, the price for the Tinysa ultra seems to vary from $159 to roughly $240 depending on manufacturer and ad contents. ? Pete, wa2cwa ? ? -- K2WH |
Re: A good start
¿ªÔÆÌåÓý
Pete and the group,
You have to be very careful where you order from. The designer and manufacturer of the TinySA recommend R&L electronics hear in the states.
Amazon and E bay are loaded with clone knock-offs.?
I would recommend visiting the TinySA groups.io site and do a little research before?you buy.
Oh, Yes R&L Electronics price 149.95 shipping 10.95.
Walt Cates, WD0GOF
?
From:[email protected] <[email protected]> on behalf of Peter A Markavage via groups.io <pmarkavage@...>
Sent:?Friday, December 27, 2024 4:47 PM To:[email protected] <[email protected]> Subject:?Re: [HallicraftersRadios] A good start ?
You didn't mention manufacturer or where you got it. On Amazon, the price for the Tinysa ultra seems to vary from $159 to roughly $240 depending on manufacturer and ad contents.
?
Pete, wa2cwa
?
|
Re: A good start
I too got a Tiny SA Ultra from Santa this year. I'm waiting for a DC block and a set of attenuators before I use it much, in order to keep from damaging it. I would recommend getting the TSA Ultra from R&L in the US. There are a TON of ripped off clones of this thing circulating through various places. It's staggering to get a piece of gear for $159 that replaces a $20K box of a few years ago. Merry Christmas to us! :-) John K5MO On Fri, Dec 27, 2024 at 5:49?PM Peter A Markavage via <pmarkavage=[email protected]> wrote:
|