开云体育

I just went to the Mouser files and at the top and bottom of each page, you can click "Next" or "Back" and page through the catalog, maybe the entire catalog. Interesting the way this stuff works

I have added (2) PDF files in the "Files" section. These are the (2) pages of knobs offered by Mouser. Some of the knobs look to be close replacments for Hallicrafters, Swan and

Try page 1235 and items 450-1170 and 450-1171. Both look close to the Hallicrafters knobs on the SX-99

In addition, try this page in Mouser Electronics Catalog or website, www.mouser.com/eagleplasticdevices K2WH wrote: discussed. close. make

Look further down the messages here. I think this was already discussed. As an alternative, try this site. http://www.oselectronics.com/ They have lots of replacement knobs and you might find

i am curently trying to restore a couple of sx99's and they have bastard knobs..i want to replace them with originals or repos to make them complete. any body got some spares at a reasonable cost

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the HallicraftersRadios group. File : /SX-17.pdf Uploaded by :

While I just posted the SX-117 restoration has gone well with the BFO adjustments, a new and puzzling item has reared its head. The selectivity control, which is connected to the 2nd conversion

Further to this, I should add, that new or current bottles of "White Out", no longer use a brush for application, they have a triangular shapes wedge as the applicator. Sort of looks like a very

I've done something similar with old instrument knobs. I first give them a good soap-and-water cleaning with mechanic's hand cleaner (Go-Jo, Goop, etc) and an old tooth brush. Sometimes, this is

Well, I think I finally got it. At the suggestion of others, a fresh look or adjustment of the BFO circuit was needed. This seems to be the most critical adjustment one can make on an

Try this: Charles Talbott, K3ICH 13192 Pinnacle Lane Leesburg, VA 20176-6146 (540) 822-5643 E-mail: pincon@...

I never heard of him but I and I am sure others would like to know about this vendor. Any answers to this question? Bill, K2WH wrote:

I cannot answer that question. If you don't already have one, your best bet is to get a service manual for the receiver. You can get them from various sources such as radioreprints. Do a

wrote: looped overloading, Thanks for the tip. It has all NOS tubes from Antique Electronics Supply that arrived on Saturday! What would be the expected (approximate) range of the AVC voltage

This person sells knob inserts for various makes of equipment? Thanks, Ed.

Still working on the SX-117 receiver. This is probably known by many old radio restoration experts but I tried this idea with the knobs and it came out quite well and I thought I would pass it

For a receiver such as the S-38, almost any long wire, straight or looped will work fine. I would just put up as much wire as possible and go from there. If you are experiencing overloading, then I

Hi all does any one have a spair knob for a SX 110 I just bought a sx on Ebay and it is missing a knob. Tom kd8bjh

Hi I use a slinky antenna home made but like the antennas sold on ebay. Its hanging on a hook on my shop door. I do not think I have $5 invested. A pece of wire a push on connector to fit the slinky