开云体育

That’s the best looking SX-23 I’ve seen. Congrats! Paul, W9AC Sent: Friday, January 10, 2025 1:21 PM To: [email protected] Subject: Re: [HallicraftersRadios] Another new

Welcome, Tom.? I'm also new to this forum.? I've been a ham for 30+ years now and in the past several years have gotten into vintage receivers and transmitters.? I hope saying this doesn't get me

I have just been approved as a member of this list and have been busy reading many of the posts to familiarize myself with it. I am not a licensed amateur radio operator but have been a SWL since high

You did not read that right It is similar but not the Edison system - the one we use is SIMILAR to the Edison split DC system! A *split-phase* or *single-phase three-wire* system is a type of

Yes, it is known as the Edison split phase system, see:https://en.wikipedia.org/wiki/Split-phase_electric_power#:~:text=A%20split-phase%20or%20single,-wire%20direct-current%20system.JimLogic: Method

"Edison" split phase system? Edison fought the AC system - he was the DC guy Grounding and where neutral and ground interconnect depends on where the main (i.e. first) panel is located. After that

Leon, RE you should CHECK AND INSPECT it from time to time Check IT the neutral only ? or IT the local grounding only ? … as far the neutral is concerned, how do you go about testing it

That's the way it is supposed to be.? But to be SAFE you should?CHECK AND INSPECT it from time to time, things can and do happen. Recently my internet connection on the power?pole was cut by a

Great catch Walt! HNY. 73/jeff/ac0c alpha-charlie-zero-charlie www.ac0c.com

Some time ago there was a topic about a frequency shift when switching from standby to transmit and a problem with the calibrate switching function for CW operation in the HT-46. Today I ran across a

Testing the waters for a SX-28 cabinet intact and in good condition. The SX-28A I'm finishing up needs a nice cabinet to go with it. Let me know what you have. Thanks, Tom W3TA

Yes, that's what I understand, too, and we have the ground rod (two) in place and properly connected to the service entrance panel. But with the neutral coming from the power company's transformer at

Ya Jim, that or a close variation depending on where you live; the local grounding being variable with “soil” or rocks or sand. It was the neutral [grounded neutral] that was open so my neutral

Isn't the neutral line grounded in the Edison split phase system at the pole mounted transformer and again at the service entrance of the residence?? Every house I have lived in had a copper clad

Maynard, it was the connection at the pole in my case; anyhow as someone said, the so called “neutral” can not be guaranteed to be at ground level. Sent: Monday, January 6, 2025 9:18 AM To:

I am looking for an SX-146. It doesn't need to be functional, just complete and not butchered. borrow or buy. Walt Cates, WD0GOF https://wd0gof.com/Hallicrafters A majority of acceptance is not

That happened to mine, too, some years ago. Measurements showed that the neutral lead coming from the power company via the service entrance had a loose connection which the power guys fixed quickly

James, I certainly was not the one to say any topic is stupid. That is like the idea of a stupid question. What would it take to make a topic stupid? Now that you remind me, the neutral to my house

Hi Don, I agree, it's a stupid topic.

Hi Jim, Sounds good; You can easily start another topic that we will also discuss to whatever length. We gotta do something to keep going, Meanwhile, the 60Hz power has been going for 130 years plus