开云体育

I also find Dave and Just Radios a good place to buy resistors and capacitors. I've used them frequently. Bob, AF6C

Its safe. If you are concerned with accidental contact with the socket you can put a piece of tape across it. Or, simply unwire the socket and link the necessary wires internally. -- Richard Knoppow

My S-38E, acquired new in 1957, was a huge improvement over one tube regens and an old Philo console that allowed me to copy CW by listening to the hisses without a BFO. I still had the S-38E when I

Richard, Yes they cared about appearance. Beauty is in the eye of the beholder but to me the most beautiful is the SX-28. Bob W4JFA [email protected]> wrote:

Thank you for the compliment (I collect them). I suppose restoring classic cars is similar, one can wind up replacing nearly all the parts and come out with what amounts to a new car that looks like

RichardWell said!? Jim Logic: Method used to arrive at the wrong conclusion, with confidence.? Murphy

A note: Collins took the side tone out of the 32V-3 as part of de-TVI ing it. The 1 and 2 versions had it. Evidently, it was a leakage path for RF they couldn't stop. In the past I mostly monitored my

Someone tightened all the loose screws. BTW, when did you last change your phono cartridge? -- Richard Knoppow Los Angeles WB6KBL SKCC 19998

Jim, I was looking at data sheets for the ox etc from oh mite. I can't find anything about them being non-inductive. Did I miss it? Bob W4JFA [email protected]> wrote:

Dave @ justradios.com gives great customer service and the caps and resistors are of very good quality and reasonable priced IMHO. I have purchased hundreds of both from him over the last couple of

Good Evening, I will second the motion for Just Radios when looking for general resistor and capacitor kits. Look at Dave’s website and you will see that he even has them segregated in most used

Greetings, I like using Ceramic Composition Resistors (OX/OY) series as they are non-inductive. ?Mouser sells Ohmite brand. As for Hayseed Hamfest, I've known Tom since he started offering cap kits

You can get a resistor kit on amazon that contains every value you would ever need. They are all spot on and high quality. You can get a 1w kit and a 2w kit for 10 bucks each. The new 2w are so small

FWIW, I wasted some of my mis-spent youth working for a manufacturer of carbon and metal film resistors. Long ago. Carbon film resistors will run at red heat without damage except to the conformal

I've recently gotten caps and tubes from them, good outfit. -- Richard Knoppow Los Angeles WB6KBL SKCC 19998

Metal oxide film is not the same as carbon film or metal film. Any of these is superior to composition resistors. I have never found any authoritative source saying that composition resistors were

Haven't tried it yet other than for testing.? It works just fine.? I might like the "T2" adjustment process better since it's a "set and forget" method. 50W output is more than enough if the band is

Hi tom, Re: “ I've learned that NOT ALL radios benefit from metal-oxide film resistors, such as made these days... smaller leads AND less heat dissipation capacity.” “smaller leads” means

Greetings All. I’ve used Hayseed Hamfest for Halli capacitor kits with good results. However if you’re looking for resistors try Antique Radio Supply a.k.a. Tubesandmore.com. They stock metallic

Not sure if they STILL carry them, but bought BRAND NEW (not NOS) carbon composition resistors from MOUSER... Brand name began with a "K" (think it was KAMAYA)? Reasonably priced, I did 2 HRO-60s