Re: SX100 DC power plug question

don Root All Messages By This Member #30390 开云体育 A short piece of solid electrical wire can be stripped at both ends and plugged in [carefully to the correct? pins]. maybe you need #12, or 10 ? to fit snugly. With two pairs of good pliers, you should be able to make it like a staple.Then leave it there ? toggle quoted message Show quoted text From: [email protected] [mailto:[email protected]] On Behalf Of Richard Knoppow Sent: Tuesday, June 18, 2024 11:10 AM To: [email protected] Subject: Re: [HallicraftersRadios] SX100 DC power plug question ? Its safe. If you are concerned with accidental contact with the socket you can put a piece of tape across it. Or, simply unwire the socket and link the necessary wires internally. On 3/30/2024 6:49 AM, Keith wrote: If a DC power plug is not available for the back of one of the SX series radios, is it safe to bridge across the terminals inside the radio? Think its pin 6 & 7 but dont remember for sure. Or a suggestion on where I may find one of these? Imagine they may be getting difficult to locate. -- Richard Knoppow Los Angeles WB6KBL SKCC 19998 ? -- don??? va3drl

Join [email protected] to automatically receive all group messages.

开云体育