开云体育

Oh hey, cool!? Looks like we did just about exactly the same thing with virtually identical Noctua fans.? Nice instructional web page.? So much better than my just giving part numbers and saying

Hey Scott, If interested: Here's my fan replacement info here: https://www.techtravels.org/2013/08/replacing-hp-16700a-logic-analyzers-panaflo-loud-fan-with-new-noctua-fans/ While I think the CFM

That's using your head.

Nah .... in this context Bernoulli equations are just so much hot air.....

You can upgrade to the latest version of software for the system. This can be a little tricky, the system is particular about the SCSI cdrom drive and some versions of the software image (eg, the

Ed If ur talking about the YIG takes -10 and +20 We have the manual if u need it Dave Manuals@... September 30, 2018 at 7:46 PM "Ed Breya via Groups.Io" <edbreya@...>

This was to Peter Gottlieb, by the way.? I changed the subject but didn't include the original question.? Sorry.

In the 16702A I put (3) NF-S12A PWM fans (120mm x 120mm x 25mm) plus (2) NF-A6x25 FLX fans (60mm x 60mm x 25mm).? The PWM fans aren't actually doing PWM, of course, but you can wire them for constant

Hmm, sounds like it. If upgrading the firmware takes care of the problem, let me know and I'll add an FAQ entry. -- john, KE5FX Sent: Monday, October 01, 2018 4:46 AM To:

Neil Have been there--use lan and print option you can have a nice screen plot to your pc. Hardy Fra: [email protected] [mailto:[email protected]] P? vegne

Well this is interesting.? Exactly the same outcome as GPIB when I use ethernet with psaplot.? Also ssm still fails.? Time to get a firmware update done I guess. Neil C:\Program Files

It'll be worth it, trust me. :) Once it has acquired a DHCP lease or otherwise has a valid IP address, check to make sure the SCPI port is set to 5025 (you can leave Telnet at 5023) and use 'Edit

Thanks John, the same thing happens even if I don't send any config strings.? I suspect it might be a timing issue, but I'm pulling the thing out of the rack to connect the ethernet port. Whose silly

Hi, Neal -- I haven't heard any other reports of this behavior. I just tried running psaplot with a Prologix adapter, and it appears that repetitive screenshot captures work OK here:

[email protected]> wrote: Thank you for the explanation. The 4284A/4285A/4286A family of LCR meters is my favorite of all of the HP, I also have an old 4263A LCR meter I bought fairly cheaply. It

Don, Thanks for that as I am not familiar with the HP LCR meters. I was mainly describing the results format. Regards Noel

Thank you for those part numbers! That gets me quite a bit closer to being able to use this machine. I remember reading something about being able to add extra features via some software hack. Google

All, please note that where 5V is referenced in the “strange readings” it is actually 5mV and the high allowed reading is 6.42mV. This would not be out of range accuracy as this is probably the

I'd be interested in the model number for those fans. Peter

If you're looking on eBay your best value might be a new/unused complete set: 16550-68702 (Should be a complete set of 6 POD flying leads + grabbers + ground extensions + spare leads) 16555-68702