Re: E4406A GPIB errors with KE5FX utilities
|
Neil
Have been there--use lan and print option you can have a nice
screen plot to your pc.
Hardy
?
?
Thanks John, the same thing happens even if I don't send any config
strings.? I suspect it might be a timing issue, but I'm pulling the thing
out of the rack to connect the ethernet port.? Whose silly idea was it to
install three 42U racks in my study without any rear access, then fill them
with big heavy lumps of testgear?? Maybe I just a firmware update.?
Let's see how I get on with the ethernet connection though.? I wish I'd
thought ahead and fitted a patch cable BEFORE slamming it all in the rack.
Neil
?
toggle quoted message
Show quoted text
On 01/10/2018 11:43, John Miles wrote:
?
That being said... if your E4406A has an Ethernet jack, I'd strongly
recommend using that instead of GPIB.? The connection will be much
faster.? SSM - john, KE5FX
?
?
?
If I fire up my E4406A and issue
an SCPI control string to it, then capture a spectrum and request a GIF grab
using PSAPLOT, it works fine the first time.? Subsequent use of the same
command result in a read error 0x2...
|
