3586B Selective Voltmeter Help trouble shooting
I bought an HP3596B off EBay. ?I have a service manual on order. ?First thing I did was remove the leaky battery and thoroughly clean the PS board. It looks good, however if I look down to the edge connector inside the unit I can see it has the blue buildup on it from the battery leak. I'll save that until I disassemble to clean and lube the switches. ?At power up the self calibration comes back with CE-F. One poster suggested I put in? Recall, Decimal point, Center Frequency ,8, when I do it comes back with Fail? 1? 0. ?Anyone have info on what the error codes denote? ????????????????????????????????????? Thanks, Lamont
|
DELETE THE OTHER MESSAGES FROM ME THIS MORNING
Just to be sure, I've changed the subject line....
DELETE THIS MESSAGE!!!
A message purports to come from me this morning to various people and groups in my Yahoo mail list.? It is NOT from me.? Delete it.? ?Do not click on the link in the message - it probably takes you to a bad place.? Just delete the message.
I don't think my Yahoo account has been compromised.? My e-mail address was probably just spoofed, but it's an interesting random-seeming collection of e-mails from the few I contact through yahoo mail.
?Sorry for the inconvenience,
? Dan
On Thursday, October 19, 2017, 7:17:11 AM EDT, Daniel Koller <DanielKoller@...> wrote:
|
DELETE THIS MESSAGE!!!
A message purports to come from me this morning to various people and groups in my Yahoo mail list.? It is NOT from me.? Delete it.? ?Do not click on the link in the message - it probably takes you to a bad place.? Just delete the message.
I don't think my Yahoo account has been compromised.? My e-mail address was probably just spoofed, but it's an interesting random-seeming collection of e-mails from the few I contact through yahoo mail.
?Sorry for the inconvenience,
? Dan
On Thursday, October 19, 2017, 7:17:11 AM EDT, Daniel Koller wrote:
|
Yes, I found it very impressive. The phase lock loop design(20/30, M/N and YTO loops combo) is shared by 8340/41, 8566, 8672 and possibly other sweepers and SAs too. Learned a lot by studying the service manuals:)
Calvin
|
Tobias,
Look at page 9-49 in the 8568 service manual (Vol. 4). The section is called "RF Section Analog Troubleshooting".
The problem you describe does not seem to me like it's YTO related. It sounds more like spinning? the rotary pulse generator somehow corrupts the tuning ramp.
Vladan
|
Re: Found a on line auction selling several HP items Oct 26 end date
I have had a UPS store pack for me only once; the store, in suburban Minneapolis, did an excellent job with a large tube-type oscilloscope, getting it to me undamaged. Packaging and shipping to the west coast was ~$100 so definitely not cheap.
Jeremy
?
LOL.. I was not trying to endorse anyone one.? I have had good luck getting equipment from on line auctions.? Some on this board, may be close enough to not needing anything shipped. ?
This auction has potential since the primary focus is HAM stuff.? Someone may find the a deal.
|
Hi, the HP8566 and HP8568 spectrum analyzers are two different designs. Both are well described in? the HP Journals of that time. Quite impressive if you ask me...
G?ran
|
On 10/18/2017 04:01 PM, Tobias Pluess tobias.pluess@... [hp_agilent_equipment] wrote: As far as I have learned, most HP YIGs are pretty similar.
Have a look at the picture here
where you can see a YIG osc with its bias board, A44. There are some pin
numbers. Ah-HA! Thanks! -Dave -- Dave McGuire, AK4HZ New Kensington, PA
|
Hi Dave
As far as I have learned, most HP YIGs are pretty similar.
Have a look at the picture here
https://hb9fsx.ch/wordpress/wp-content/uploads/2017/10/20171011_095836.jpg
where you can see a YIG osc with its bias board, A44. There are some pin numbers.
Tobias
toggle quoted message
Show quoted text
-------- Original message --------
From: "Dave McGuire Mcguire@... [hp_agilent_equipment]"
Date: 10/16/17 22:41 (GMT+01:00)
To: hp_agilent_equipment@...
Subject: [hp_agilent_equipment] YIG pinout
?
Does anyone have the pinout for the 5086-7267 YIG oscillator handy?
My google-fu seems to be weak today.
Thanks,
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
|
Re: Found a on line auction selling several HP items Oct 26 end date
LOL.. I was not trying to endorse anyone one. ?I have had good luck getting equipment from on line auctions. ?Some on this board, may be close enough to not needing anything shipped. ?
This auction has potential since the primary focus is HAM stuff. ?Someone may find the a deal.
|
Calvin,
does that mean the YTO is unlocked during the sweep?
Tobias
toggle quoted message
Show quoted text
-------- Original message --------
From: "Calvin Guan guancalvin@... [hp_agilent_equipment]"
Date: 10/16/17 00:20 (GMT+01:00)
To: hp_agilent_equipment@...
Subject: Re: [hp_agilent_equipment] Re: 8568B YTO unlocked
?
On my 8566b, if the span is greater than certain MHz, the sweep source is operate in “Lock and Roll” mode - locks to the sweep start frequency then applies a ramp to roll.
Calvin
?
I don't know about the screen flickering, but I do think the YTO loop behavior is normal. At wider spans it is not constantly phase-locked - it is driven open-loop with fairly accurate sweep current, and I think possibly re-phase-locked just at the beginning
of the sweep each time around. For wide spans, you can't resolve the small frequency error on-screen anyway, but for narrow ones, more stability is needed, so the LO is locked. It's also possible that the narrow spans instead fix the first LO and use the second
LO for sweeping - I can't recall for sure, but it should be one of those two schemes.
Definitely get the manual if you haven't already.
Ed
|
Hi,
I have the manual, of course :-)
But I cannot find some info about when the YTO is allowed to be unlocked.
I also have not yet managed to fix the flickering trace. Actually, 'flickering' ist not quite the right expression; it is a bit more complicated: if there is a signal on the screen and the marker is moved along the trace, the trace is slightly 'pulled'
along the frequency axis towards the direction in which the marker is moved, which looks like an unstable, flickering display if the marker is moved fast (e.g. when turning the knob rapidly). As soon as marker movement is stopped, the trace bumps back at its
former position.
However, this absolutely strange behaviour can only be observed when the span is wider than 1 MHz; in this case also the YTO unlock LED is flashing (but no warning message on the screen).
I hope I have some time tomorrow to check the tant caps. I hope it is not the YTO or a mixer which went on the blink, but I guess as long as the YTO oscillates and signals can be viewed correctly (in principle) on the screen, then the RF path seems to
be all good.
Tobias
toggle quoted message
Show quoted text
-------- Original message --------
From: "edbreya@... [hp_agilent_equipment]"
Date: 10/15/17 20:34 (GMT+01:00)
To: hp_agilent_equipment@...
Subject: [hp_agilent_equipment] Re: 8568B YTO unlocked
?
I don't know about the screen flickering, but I do think the YTO loop behavior is normal. At wider spans it is not constantly phase-locked - it is driven open-loop with fairly accurate sweep current, and I think possibly re-phase-locked just at the beginning
of the sweep each time around. For wide spans, you can't resolve the small frequency error on-screen anyway, but for narrow ones, more stability is needed, so the LO is locked. It's also possible that the narrow spans instead fix the first LO and use the second
LO for sweeping - I can't recall for sure, but it should be one of those two schemes.
Definitely get the manual if you haven't already.
Ed
|
I am sorry, but just saying ..."poor or lazy reporting"... is only sugar coating the facts.
The fact is, the reporter did not confirm his story, so in fact, he (she or it) made up
some of the alleged facts.
If you make up facts, that to me, is FAKE.
73, Dick, W1KSZ
toggle quoted message
Show quoted text
From: hp_agilent_equipment@... on behalf of caesarv@... [hp_agilent_equipment]
Sent: Wednesday, October 18, 2017 9:27:21 AM
To: hp_agilent_equipment@...
Subject: [hp_agilent_equipment] Re: Fake fire New
?
As the original poster of this thread, I did not meant this to be political in nature.? I just wanted to debunk this shoddy reporting before it caused undue worry. ? I'm sorry, I should not have used the term "fake news"
since it was obviously not faked, but instead was just poor or lazy reporting.? ABC 7 did eventually correct the article.
Needless to say, this was a shock to all of us that work there.? We had no other source of news since the entire area is blocked off.?? I refused to believe this article and fortunately was proven right.? Our CEO also had to deal with this inept news report:??
Sadly, I know way too many people that lost everything.
|
As the original poster of this thread, I did not meant this to be political in nature.? I just wanted to debunk this shoddy reporting before it caused undue worry. ? I'm sorry, I should not have used the term "fake news" since it was obviously not faked, but instead was just poor or lazy reporting.? ABC 7 did eventually correct the article.
Needless to say, this was a shock to all of us that work there.? We had no other source of news since the entire area is blocked off.?? I refused to believe this article and fortunately was proven right.? Our CEO also had to deal with this inept news report:??
Sadly, I know way too many people that lost everything.
|
Re: Found a on line auction selling several HP items Oct 26 end date
Same experience. Shipped an 83712 from NY to CA. Had them pack it. Glad I insured it. Face plate smashed in.?
Pictures of it on the counter @ the UPS store will make the claim easier.?
?
On Wed, Oct 18, 2017 at 9:31 AM, <cggaul@...> wrote:
> I was looking for some Ham equipment and found a Kansas City based Online auction listing several HP Items.
>
>
> They will arrange shipping!
Sort of:
"For shipping, we work with a local UPS franchise. They will pickup
your items the week following the sale and contact you directly to
discuss shipping options and costs, and then you will pay them
directly."
My experience is that UPS store packing is very expensive, but also
completely ineffective at protecting the contents :(
Highly disrecommended.
|
Re: FS: HP Jornada palmtop computers
Hello,
can I buy these for my retro show?
They will NOT be mistreated, promised!
---
With best regards
Tam HANNA (emailing on a BlackBerry PRIV)
Enjoy electronics? Join 6500 other followers by visiting the Crazy Electronics Lab at Am 18. Oktober 2017 17:58:52 MESZ schrieb "Brad Thompson brad.thompson@... [hp_agilent_equipment]" :
?
Hello--
I'm offering the following HP small (palmtop) computers and accessories.
One HP Jornada 720 with one expansion base: Includes stylus and original
battery (needs replacement). This unit boots when connected to an
external power source.
Two HP Jornadas 820 (F1260A): both include original batteries: one has
a broken right-side screen hinge, the other is mechanically intact.
Both units boot when
connected to an external power source.
One HP 820 sync cable (untested).
One HP F1265 AC adaptor (12 VDC @ 3.5A) in working order (supplies
power to HP720 and HP 820.
One 16 MB Compact Flash card with HP 820 user's manual and
other files.
I'm asking $25.00 for the lot of all items, which includes USPS
Priority-mail
shipment (a $13.60 "value") for shipment to U.S. locations.
(These palmtops may have had test-and-measurement
applications, but it's unlikely. I apologize in advance to anyone who
takes umbrage at my offering these little jewels to the group.)
Question welcomed, PayPal honored.
73--
Brad AA1IP
|
FS: HP Jornada palmtop computers
Hello--
I'm offering the following HP small (palmtop) computers and accessories.
One HP Jornada 720 with one expansion base: Includes stylus and original battery (needs replacement). This unit boots when connected to an external power source.
Two HP Jornadas 820 (F1260A): both include original batteries: one has a broken right-side screen hinge, the other is mechanically intact. Both units boot when
connected to an external power source.
One HP 820 sync cable (untested).
One HP F1265 AC adaptor (12 VDC @ 3.5A) in working order (supplies
power to HP720 and HP 820.
One 16 MB Compact Flash card with HP 820 user's manual and
other files.
I'm asking $25.00 for the lot of all items, which includes USPS Priority-mail
shipment (a $13.60 "value") for shipment to U.S. locations.
(These palmtops may have had test-and-measurement
applications, but it's unlikely. I apologize in advance to anyone who
takes umbrage at my offering these little jewels to the group.)
Question welcomed, PayPal honored.
73--
Brad AA1IP
|
Re: Found a on line auction selling several HP items Oct 26 end date
On Wed, Oct 18, 2017 at 9:31 AM, <cggaul@...> wrote: I was looking for some Ham equipment and found a Kansas City based Online auction listing several HP Items.
They will arrange shipping! Sort of: "For shipping, we work with a local UPS franchise. They will pickup your items the week following the sale and contact you directly to discuss shipping options and costs, and then you will pay them directly." My experience is that UPS store packing is very expensive, but also completely ineffective at protecting the contents :( Highly disrecommended.
|
Found a on line auction selling several HP items Oct 26 end date
I was looking for some Ham equipment and found a Kansas City based Online auction listing several HP Items.?
They will arrange shipping!
HP-8640B:??
HP-8657A:?
HP-3325A:?
HP-652A:?
HP-334A?
HP-8640B:?
73
|
Re: Request for E4406A CLIPs (was Re: E4406A Input Attenuator)
Hi
There are ?relased clip for the rf unit and the fan controller
boards.
At keysight forum it were promissed that the ?rest would be
relased soo-so it exist at keysight!
Tony--please contact me.
Hardy
?
Fra:
hp_agilent_equipment@...
[mailto:hp_agilent_equipment@...]
Sendt: 17. oktober 2017 16:37
Til: hp_agilent_equipment@...
Emne: [hp_agilent_equipment] Request for E4406A CLIPs (was Re: E4406A
Input Attenuator)
?
?
Just to help clarify on Alexander's request - This is a
completely different repair from the one I've been working on (still not
complete unfortunately) and he's just asking for the CLIPs if anyone has them.
I only have the RF one but I think he needs the Front Panel
& Power Supply ones if they exist.
Alexander - It occurs to me now that you might not be able
to get one for the power supply as a lot fo these were purchased from 3rd
parties and HPAK never had the schematics to start with.
|
Jeremy Nichols
G?ran Krusell
Dave McGuire
bownes