开云体育

Frank, Thanks, I could buy those but the truth is that in my country we have to pay more than 100% taxes. One single FET would cost more than a whole minimum wage of salary around here. So I try to

This is a selected part, which means that something similar was widely available, but I can't give you any commercial part numbers. Here is what I have: National Semiconductor SF83025 or Intersil

Keith, That statement usually means they won’t sell you certain parts as they want you to send the unit to them for repair. Although the 16047A is a current product, Keysight do not offer repair

hard to find a replacement. Mouser has several dual J-Fets, you can try some of them. Or see this seller on Ebay that has the original: h t t p s://w w w.ebay.it/itm/292490498148?hash Frank

I've been trying to find a spare part for a HP16047A test fixture (used on e.g. a HP4275 LCR meter). The part I'm after is described in the manual as 'stopper' p/n 16047-40000 and is a small plastic

isn't the part that breaks out of plastic anyways? <david.partridge@...> wrote:

Hello, I need to replace a dual monolithic N-FET transistor on HP 8903B, the HP code for the part is 1855-0418. Can anyone help identify this part so I can source a replacement? Thank

I have a new to me HP 4411B spectrum analyzer and I am wondering about options and software for the unit. It is currently fully working and no faults are detected with it so that is good. It does have

Shapeways can Sent: 02 June 2021 18:14 To: [email protected] Subject: Re: [HP-Agilent-Keysight-equipment] How to fix broken HP key Most people can't 3d print metal

Most people can't 3d print metal :-) Calvin, If no one in the USA can give you one, I can put a contact in the post if you PM me your address. Robert G8RPI (Cambridge UK)

Currently eBay is showing 1804a 4 channel plugins for around $20-50. The 1804 does 4 channels but no math. The 2 channel units have addition and the specs say when one Chanel is inverted it acts like

Has anyone tried 3D printing those switches?

John, I sent you a PM. Check your spam. Wally KC8INK

In case you go looking for a key switch parts donor, a (broken) HP 3437A would be a very good (and undervalued) candidate. They are offered regularly at acceptable prices and the Bill West keys in

Before you go gluing stuff together, let me tell you, do NOT use glue. Figure out what plastic is being used, and use a PLASTIC WELDING COMPOUND. It consists of a solvent (which quickly evaporates)

You can go to settings/camera/format and change to compatible and it will save in jpg/h264 format instead except for things like 60fps video. Details are there in the settings. Sandra Sent from

i have a 1710b which is busted, maybe time to start parting it out... i am not home till mid June, but i can ohm it out then... Maurice

The GNU Image Manipulation Program (GIMP) also supports HEIF/HEIC in recent versions.

BTW -- I won't be able to pull the Turbo info from my unit. In replacing the CRT I am only working on the 85662 IF/display unit and not digging into the RF section where the processor card apparently

That's another reason I don't care for Apple...? They always have to do it "their way".?? Plus, you have to use a special viewer, which is featureless.? Don't get me started. Daun -- Daun E.