开云体育

Hi Don. No worries. I also plan on trying the DIP switch (or jumpers) on my '50 and see if it can do above 20 GHz. I'm limited to 24 I think with my 8350 which is my current project. Will post

Thanks Bob,Mark, and Askild. I apologise for taking so long to reply - this is due to the different time zones. Yes, the `52 has a different sampler than the `50,or`51. The `50,and `51 have the same

I had to order and ship to my work, they would not deal with my home address. Fortunately i work for a custom magnetics company that supplies inductors and chokes to Keysight lol.

Hi Dave, Yes, I meant 1750 not 40, typo :) they are parts of many cal kits and available separately too. I've found the part numbers in various HP adapter catalogs and manuals but no indication of IL

The '52 has a different MW sampler (might be screened for upper frequencies) and a different input connector assembly. mark

What are the hardware differences between the '51 and '52? Thanks! Bob

Just tested changing the switches, and checking with ID? sw 4&7 - HP5350B sw 4&6 - HP5351B sw 4&5 - HP5352B Askild [email protected]> wrote:

Hi, Just open my 5351B, and the switches was the same [image: 5351B.jpg] Then I checked gpib ID? response, and it gave: HP5350B. So these switch settings is for the 5350. I must say that this was a

Instructions to alter 5350/51B to a 5352B: There’s either a DIP Switch (S1 on the motherboard) or a set of jumpers right behind the processor board. For the 5350B, the settings are positions 4 & 7

Am 05.03.2020 um 16:17 schrieb Yves Tardif: these are the jumpers in my 5350B Rainer

I seem recall that the 8350A was mostly an R2D2 machine, but the "B" model became more chatty with its HPIB. -Chuck Harris Yves Tardif wrote:

There is a complete set of docs, EPROMs, etc on K044b's site for the 8350B: http://www.ko4bb.com/getsimple/index.php?id=manuals :

Hi, This is the setup of my 5350B…same config. I bought unit like this. The answer to ID? Is HP8350B. In my case, I have option 006 and 010 Yves De : [email protected]

All ready have one using all surface mount 50 ohm stripline Form, Fit, Function 2-way interchange Regards, Stephen Hanselman Datagate Systems, LLC

Yep.? I hear from him pretty regularly, especially since I seem to be doing my best to build up his retirement fund ;-) For those not familiar with him - and his company ArtekManuals - he provides at

Sorry read wrong model number... Please ignore my mail... :) Askild [email protected]> wrote:

Hi, For the 5350/1/2, the id command is: ID? Its in the "HP 5350B, 51B, 52B Operating & Programming.pdf" manual. I probably downloaded it from either keysight or ko4bb. BR, Askild

Hi. There appears to be a full user manual here:- https://archive.org/details/hp_8350B/page/n77/mode/2up Viewable online, but there are download options in various formats. From a quick look, from

Hi Don, The 5350/51/52 all use the same EPROM. There are some dip-switches on the main board that set the different options. I have a 5351B with a newer revision of the main board, 05350-60025, where

Tim - Assuming you mean 1250-1745 and -1750, these are both part of the 85033E/400 kit. Any published specifications are in that manual, downloadable from Keysight. They are only spec'd for mechanical