Chip needed
Folks,
Looking for the following ECL chip
HP P/N 1820-1344 which crosses to Mot MC12040L Phase detector.
Thanks
Tom
By
Tom Dawson
·
#75
·
|
Re: Equipment rack rail C-clip nuts
dmac1054@... writes:
Thank you, Doug. I will!
Regards,
Don
By
donlcramer@...
·
#74
·
|
Re: Equipment rack rail C-clip nuts
Hello Don,
The old age does not lend itself to quick thinking. I just sent you an e
mail offering to send you few panel nuts and did not think that you were
talking about "speed nuts", but then you
By
Miroslav Pokorni
·
#73
·
|
Re: Equipment rack rail C-clip nuts
Those guys might have a minimum order. I just remembered that I have few
from a DEC's rack. They are square piece of metal, about 3/16 " thick with
10-32 thread cut and a spring retainer. If just few
By
Miroslav Pokorni
·
#72
·
|
Re: Equipment rack rail C-clip nuts
Might try http://www.tinnerman.com/
Doug
Agilent/HP
The part is an
a "support part for
as
work with
your head
By
dmac1054us <dmac1054@...>
·
#71
·
|
Equipment rack rail C-clip nuts
Thought I'd ask the group:
I'm looking for a source for the C-clip "speed nuts" used in Agilent/HP
equipment rack rails, such as in the N4043A ( nee 1181B ) cart. The part is an
Agilent PN
By
donlcramer@...
·
#70
·
|
HP 680 strip chart recorder
I need the wiring for the plug on the back of this unit.
thanks
doug
By
dmac1054us <dmac1054@...>
·
#69
·
|
Manual for HP 651B and Advice
Hi All,
Just picked up an HP 651B and have a few problems.
For one thing the unit seems to be extremely sensitive to the "band"
selector switch, and the 10MHz range in particular. Switching to it
By
aquaman8_2001
·
#68
·
|
Old Nixie counters 2
BTW, these use the COOLEST display decoders!!!
By
Michael Dunn <mdunn@...>
·
#67
·
|
Old Nixie counters
Hi group. I have a couple of old Nixie display counters. A 5214L, and a 5201L. It did take me a while to figure out the '14, but now understand what it does in all its modes. The '01 is
By
Michael Dunn <mdunn@...>
·
#66
·
|
Re: Need 3325A component ID
Hi there,
Also in computer power supplies.
The Bat signal.
Regards
Ray
By
Ray Robinson <robinson@...>
·
#65
·
|
Re: Need 3325A component ID
These TO220 packaged schottky diodes seem fairly common in switch mode
power supplies used in photo copiers and such now. I don't think you
should have much trouble finding a replacement. Perhaps you
By
Don Black <jeans@...>
·
#64
·
|
Re: Need 3325A component ID
Hello Tom,
Motorola did a lot of Schottky and ultrafast recovery diodes in TO-220
packages. Those were diodes for currents higher than 5 A and to best of my
knowledge, none of them were JEDEC
By
Miroslav Pokorni
·
#63
·
|
Need 3325A component ID
Hi, all.
I need help identifying a part on the power supply board of an HP
3325A.
It is CR10. But it resembles a TO-220 transistor.
There are three separate part numbers on it: 1) 84-0266 (top of
By
Thomas P. Gootee
·
#62
·
|
FS manuals
Vintage manuals for sale: (originals except as noted)
HP 522B counter $ 5.00
HP A4-C decade counter $ 5.00
HP 5352B freq,
By
Joseph Orgnero <joseph@...>
·
#61
·
|
HP 3460A Digital Voltmeter
Hello, I Am Looking For A PDF Of The Service Manual, This Unit Is
Quite Old, But I Wanted A Challenge.
Greyhawk
By
greyhawkeng <greyhawkeng@...>
·
#60
·
|
Re: HP 3469B multimeter
<higglyblue@y...> wrote:
the
relationship
Hi, Yes there is a manual. My copy is bearely readable. Came from
HP microfiche... Check the solid tantalum capacitors on the second
board from the top,
By
dyna_dan2 <ddufresne@...>
·
#59
·
|
Re: Schematic for HP 4328A Milliohmmeter
<leedyt@a...> wrote:
Hi Tom,
Contact me by email below. I have a working 4328A and a manual. I
can scan it for you. If it whent full scale it could be the batteries
or the probe wires.
Regards
By
dyna_dan2 <ddufresne@...>
·
#58
·
|
Program to control and print waveforms from HP54200A
I recently wrote a program to allow PCs to control and print
waveforms from the HP54200A. The program also allows waveforms to be
averaged to reduce noise and improve resolution, and it does FFTs.
By
tbfowler100 <tfowler@...>
·
#57
·
|
New file uploaded to hp_agilent_equipment
Hello,
This email message is a notification to let you know that
a file has been uploaded to the Files area of the hp_agilent_equipment
group.
File : /HP54200A programs.zip
Uploaded by
By
hp_agilent_equipment@...
·
#56
·
|