Those guys might have a minimum order. I just remembered that I have few
from a DEC's rack. They are square piece of metal, about 3/16 " thick with
10-32 thread cut and a spring retainer. If just few would do, I can put that
in mail for you.
Regards
Miroslav Pokorni
toggle quoted message
Show quoted text
----- Original Message -----
From: "dmac1054us" <dmac1054@...>
To: <hp_agilent_equipment@...>
Sent: Wednesday, September 24, 2003 9:08 AM
Subject: [hp_agilent_equipment] Re: Equipment rack rail C-clip nuts
Might try
Doug
--- In hp_agilent_equipment@..., donlcramer@c... wrote:
Thought I'd ask the group:
I'm looking for a source for the C-clip "speed nuts" used in
Agilent/HP
equipment rack rails, such as in the N4043A ( nee 1181B ) cart.
The part is an
Agilent PN 0590-0804 "NUT-SHMET 10-32-THD .5-WD STL" and is
a "support part for
which Agilent does not own the design specifications" (which I read
as
available off-the-shelf someplace).
Agilent wants 3.38 each (!) for them, and I suspect you guys who
work with
rack mount equipment know an online hardware store off the top of
your head
where one can buy a bag of them for something less.
Thanks in advance,
Don Cramer
Beaverton, OR
To unsubscribe from this group, send an email to:
hp_agilent_equipment-unsubscribe@...
Your use of Yahoo! Groups is subject to
